Philips 37PF9631D/37 Service Manual page 10

EN 10 4. EJ2.0U LA
2
Figure 4-8 Keyboard Control panel (2)
4.3.3 Side I/O Panel
6. Unplug connectors [1].
7. Remove screws [2]. See figure "Side I/O and LED Panel
removal" for details.
When defective, replace the whole unit.
2
Figure 4-9 Side I/O and LED Panel removal
4.3.4 LED Panel
1. Release clip [3].
2. Remove the panel.
3. Unplug connector [4].
When defective, replace the whole unit.
4.3.5 Speakers
After removal of the rear cover, you can access the speakers.
Mechanical Instructions
3
G_15940_051.eps
240506
1
4
3
G_15940_052.eps
240506
Caution: never disconnect the speakers with a playing set,
because otherwise the class-D audio amplifiers could be
damaged!
4.3.6 Stand-by Power Supply/Audio Amplifier Panel
1. Disconnect all connectors [1] from the panel.
2. Remove the fixation screws [2] from the panel.
3. Take the panel out of its brackets (it hinges at the right
side).
2
1
2
Figure 4-10 Stand-by/Audio panel
4.3.7 LCD Supply Panel
1. Disconnect all cables [1] from the panel.
2. Remove the fixation screws [2] from the panel.
3. Take the panel out of its brackets (it hinges on the right
side).
1
Figure 4-11 LCD supply panel
2
1
2
G_15940_053.eps
260506
1
2
1
G_15940_054.eps
260506