Epson SC-T3100X Series User Manual page 157

SC-T3100x Series User's Guide
Before Printing on Commercially Available Paper
When using commercially available paper, select the paper type setting that matches to the paper from the
following settings.
❏ Plain paper
❏ Coated Paper(Generic)
❏ Photo Paper(Generic)
❏ Tracing Paper
❏ Tracing Paper <LowDuty>
❏ Matte Film
Perform Media Adjust if there is banding, wrinkling, smearing, or uneven colors in the printing results.
"Optimizing Paper Settings (Media Adjust)" on page 42
U
When using Commercially Available Synthetic, Canvas or Film-type Paper
Before printing, carry out one of the following.
❏ Add as a new paper type setting (register as custom paper), and carry out media adjust.
From the Home screen, touch Settings - General Settings - Printer Settings - Custom Paper Setting, and
register a custom paper. After registering the paper, perform Media Adjust. Paper adjustment results will be
saved as the newly added paper type settings.
Refer to the following menu for details on custom paper settings.
"General Settings - Printer Settings" on page 114
U
❏ Select the paper type from the following Epson Special Media settings, and perform Media Adjust.
Enhanced Adhesive Syn., Enhanced Low Adh. Syn., Heavyweight Polyester, Glossy Film2
By performing the Media Adjust, paper settings for Epson Special Media will be overwritten by the settings for
the paper you use.
"Optimizing Paper Settings (Media Adjust)" on page 42
U
Note:
Test the print quality with this printer before purchasing a large amount of paper.
Appendix
157