Epson SC-T3100X Series User Manual page 115

SC-T3100x Series User's Guide
Settings item
Custom Paper Setting
(Touching any of the registry numbers from 01 to 10 will display settings items.)
Change Name
Change Reference
Paper
Advanced Media Setting
Platen Gap
Top/Bottom Mar-
gins
Back Tension
Using the Menu
Settings value
*
Plain paper , Matte Paper,
Photo Paper, CAD, Others
1.6
2.1
2.6
*
Standard
Top 3 mm/Bottom 3 mm
Top 15 mm/Bottom 15 mm
Top 45 mm/Bottom 15 mm
*
Auto
Standard
High
Extra High
Explanation
Register and change the name of the custom paper settings. The
name registered here is displayed in the Paper Type list.
Touch this to display the keypad screen. Up to 20 characters may
be input for the name. The keypad screen can be switched as
shown below with the button marked.
Touch the icons at bottom left to switch between input methods.
ABC: Enters alphabet letters.
123#: Enters numbers and symbols.
To change the key layout of the full keyboard, use Keyboard in the
Basic Settings menu.
"General Settings - Basic Settings" on page 112
U
You can select the media type that is the closest to the paper you
are using.
This is the Platen Gap (distance between print head and paper) for
the paper selected in Change Reference Paper, so it does not
normally need to be changed. Change this to a setting that will
widen the gap (a higher value) if print results are smeared.
Setting this to Standard will set the top/bottom margins as follows
depending on the printer driver print targets.
❏
CAD Line Drawing: 3 mm/3 mm
❏
Others: 30 mm/30 mm
Left and right margins will remain at 3 mm regardless of settings. If
there is any soiling on the top section of the print results, increase
the top margin.
"Printable area" on page 158
U
If there is any wrinkling on the paper during printing, select High
or Extra High.
115