3.
Remove the bolt and nut retaining the hydro rod to
the actuator arm (Figure 67).
Figure 67
4.
Remove the nut on the brake link (Figure 68).
Figure 68
TimeCutter Z Service Manual
HYDRO-GEAR TRANSAXLE
5.
Remove the bolt and nut retaining the rear of the
hydro rod to the control arm and slide the hydro
rod towards the rear (Figure 69).
mvc-150
6.
Unplug and remove the park brake switch from
the lower bellcrank bracket (Figure 70).
mvc-152
Figure 69
mvc-103
Figure 70
mvc-157
4 - 13
4