Toro Lawn-Boy TimeCutter Z Series Service Manual page 29

5. Remove the bolt, washer, and spacer retaining the
brake arm on both the right and left transaxles.
Make sure dirt and debris is cleaned off around
the vent hose connected to each transaxle, then
remove the vent hoses. Cover the open hole in
each transaxle with tape to prevent dirt entry
(Figure 31).
Figure 31
6. Loosen the four bolts and nuts holding the
transaxles to the hydro support brackets (Figure
32).
Figure 32
TimeCutter Z Service Manual
HYDRO-GEAR TRANSAXLE
7. Remove the 4 bolts and washers on the left side
of the frame (Figure 33).
8. Remove the 4 bolts located on the right side of the
frame (Figure 34).
mvc-096
mvc-099
Figure 33
mvc-739
Figure 34
mvc-736
4
4 - 3