Toro Lawn-Boy TimeCutter Z Series Service Manual page 2

This service manual was written expressly for Toro and Lawn-Boy service technicians. The Toro
Company has made every effort to make the information in this manual complete and correct.
Basic shop safety knowledge and mechanical/electrical skills are assumed. The Table of
Contents lists the systems and the related topics covered in this manual.
For additional information on the electrical system, please refer to the Toro Electrical
Demystifi cation Guide (492-4761) and subsequent. For service information on drive systems,
please refer to the Hydro-Gear EZT service manual (492-4778). For information specifi c to the
engines used on this unit, refer to the appropriate engine manufacturer's service and repair
instructions.
Toro TimeCutter ® Z model year 2003 - 2006 and Lawn-Boy Precision
are covered in this manual. The manual may also be specifi ed for use on later model products.
The hydrostatic transaxle is a sophisticated piece of machinery. Maintain strict cleanliness
control during all stages of service and repair. Cover or cap all hose ends and fi ttings whenever
they are exposed. Even a small amount of dirt or other contamination can severely damage the
system.
We are hopeful that you will fi nd this manual a valuable addition to your service shop. If you
have any questions or comments regarding this manual, please contact us at the following
address:
The Toro Company reserves the right to change product specifi cations or this manual without
notice.
The Toro Company
Consumer Service Training Department
8111 Lyndale Avenue South
Bloomington, MN 55420
Copyright© All Rights Reserved
©2007 The Toro Company
ABOUT THIS MANUAL
® Z model year 2005 - 2006