Optional Card Settings Submenu - Panasonic AW- PB306P Operating Instructions Manual

Studio sdi card
Hide thumbs Also See for AW- PB306P:
Table of Contents

Advertisement

Setting and changing of menu items
4
Return to filming mode.
When performing the settings with the
convertible camera:
Press the MENU or ITEM/AWC button and
select "End" on the main menu, then press the
YES/ABC button.
When performing the settings with the remote
control unit:
O WV-RC700A:
Set the USER SET switch to "OFF."
O WV-RC550:
Set the SET UP switch to "OFF."
After being returned to filming mode, the
convertible camera will operate as per the changed
settings.

$ Optional card settings submenu

¢¢Option Card Set¢¢
1
Zebra Indicator
Zebra 1 Level
2
Zebra 2 Level
3
Safety Zone
4
EVF Output
End
1 Zebra Indicator
This sets the Zebra pattern display which appears
in the viewfinder.
ON : Zebra
patterns
viewfinder.
OFF : Zebra patterns are not displayed in the
viewfinder.
<Note>
Even if ON is selected for this setting, the zebra
patterns will not be displayed in the viewfinder if
"CVBS" has been selected as the EVF Output 4
setting.
ON
70%
85%
1
Y
are
displayed
in
the
2 Zebra 1 Level (70% to 109%)
Zebra 2 Level (71% to 110%)
Two types of zebra patterns are displayed to use as
a yardstick for the brightness level.
The striped zebra pattern display of Zebra 2 Level
is more dense than that of Zebra 1 Level.
<Notes>
O These settings are available when "ON" has
been selected for the Zebra Indicator 1 setting.
O The setting for Zebra 2 Level should be set at
least 1% higher than that for Zebra 1 Level.
3 Safety Zone
This selects the type of safety zone that is
displayed in the viewfinder.
If "OFF" is selected, a safety zone will not be
displayed.
<Note>
The safety zone and the center marker reflect the
electrical positions which may differ from the optical
positions.
1
2
4
5
The inner frame and the outer frame are
approximately 90% and 95%, respectively, of the
safety zone.
4 EVF Output
This sets the signals to be output to the viewfinder.
Y
: Brightness signals are output to the
viewfinder.
CVBS : Color signals are output to the viewfinder.
<Note>
The zebra pattern is not displayed in the viewfinder
when "CVBS" has been selected.
9
3

Advertisement

Table of Contents
loading

Table of Contents