Using Cd And Usb; Preparation - JVC Boomblaster RV-NB200BT Operating Instructions Manual

Basic functions
Additional settings in the "Time" menu
The following functions can be set in the "Time" menu:
"Auto Update": Setting from which source the time is automatically retrieved.
Choices: "Update all" / "Update DAB" / "Update FM" / "No update"
"Set 12/24 hours": Setting the time format.
Choices: "Set 24 hours" / "set 12 hours"
"Set date format": Setting the date format
Choices: "DD-MM-YYYY" / "MM-DD-YYYY"
Effect lighting of the speakers
The Boomblaster is equipped with LED effects in the front speakers. Using the "LIGHT" button you
can set 5 different modes on the Boomblaster.

Using CD and USB

Preparation

Insert a CD
1. Open the CD compartment as described on page 9 of this manual.
2. Place a CD with the printed side facing up in the CD compartment.
3. Close the CD compartment.
Connecting USB devices
1. Press the "Source" button to select USB mode.
2. Connect the USB device to the USB port on the front panel.
Remove the USB device
1. Press the button to select standby mode.
2. Remove the USB device from the USB port.
• Always wait until the device has completely read the CD/USB device before proceeding.
• If no CD is loaded in the disc tray,"NO DISC" will be displayed.
• If there is no playable audio file in the USB device, "NO FILE" is displayed.
• For audio files, the read time may exceed 10 seconds if there is a lot of music on a CD or USB
device.
13