Basic Functions; Navigate In Menus - JVC Boomblaster RV-NB200BT Operating Instructions Manual

Basic functions

Connect the power cord to the device and to a suitable power outlet.
Telescopic antenna
1. The telescopic antenna is located on the top of the device, to the left of the CD compartment.
2. Pull out all the elements completely.
3. Align the antenna for the best reception.
Power On
Press the button on the remote control or on the device. The display will show
"JVC Boomblaster". Press the button again to switch off the device.
Volume control
Turn the "VOL" knob on the device or press the "VOL +/-" button on the remote control to increase
or decrease the volume. The selected volume is displayed graphically.
Temporarily turning off the volume: To do this, press the button on the remote control. The
"MUTE" flashes in the display. The next time the button is pressed, the original volume is restored.
Selecting a Source
"
Press the button on the main device or on the "SOURCE" button on the remote control to select
the desired playback source.
Equalizer
Press the EQ
button on the remote control to successively enter the following settings: ROCK ->
JAZZ -> POP -> CLASSIC -> FLAT ->
Using the "BASS" button on the device a 2-stage bass amplification can be called up.

Navigate in menus

To enter the menu, press the "MENU" button on the device. The selection of the menu item or the
setting of numbers is done via or buttons, the confirmation by pressing the uII button.
Setting the menu language
1. Turn on the device and select the source USB.
2. Press the "MENU" button, and the "System" menu will appear in the display. Then confirm with
the uII button.
3. By pressing the buttons or select the "Language" menu and then confirm.
4. Use the buttons or to select and confirm the desired language.
11