Air Blow Screen - Siemens SIJECT 16i Operation Manual

SIJECT OP15B Screens

3.2.8 Air blow screen

Operating sequences
3-50
Fig 3-43 Air blow screen
Press the air blow key to enter the air blow screen. See Fig 3-43.
The screen displays two statuses: Air blow 1 and Air blow 2. When the
mold reaches the position, air can blow by the set time.
Air blow 1 (Air 1) select or deselect the air blow 1. When the mold
reaches the position, air blow will be controlled by the set time.
Air blow 2 (Air 2) select or deselect the air blow 2. When the mold
reaches the position, air blow will be controlled by the set time.
Mold position (MldPos)
Press Manual Air blow 1
to enable air blow 2 function.
display the actual position of mold.
to activate air blow 1, and press air blow 2
SIJECT 16i Operation Manual