Table of Contents
Advertisement
3.1.7 Function screen
Operating sequences
Examples
Contrast adjustment Press softkey F3
SIJECT 16i Operation Manual
Fig 3-21
Function screen
Press this key to enter the function screen, see Fig 3-21, Function screen.
On this screen, users can set the robot operation, back light function, and
language (English/Chinese).
Robot
select or deselect robot.
Back light (Back Light)
selected, then back light will be turned off automatically if there is no key
pressed during 3 minutes; otherwise back light will be turned off if there is
no key pressed during 10 minutes.
Language
Select English or Chinese.
For robot selection, you can do as follows:
1.
Press key
or
2.
Press
key for the first time, it is required to input password 1
of "1111", then confirm the entry by "Enter" key);
3.
Cursor is at selection field, press
4.
Press "Enter" key to confirm the selection.
password". Input the password and press "Enter" key to confirm the entry.
Then, press softkey F3
increasing. On the contrary, press F4
darker.
select or deselect back light function. If
to enter the robot setting field;
or
key and the system displays the message "Type
again, and the screen contrast is
SIJECT OP15B Screens
to select;
, the screen will become
3-21
Advertisement
Table of Contents
