Figure 6. Install system unit side cover
Chapter 2. Installing your 5075 directly to your system unit
This chapter describes how to install your 5075 directly to your AS/400 system
unit. If you are installing a 5075 in a loop with other expansion units, skip this
chapter and go to "Chapter 3. Connecting your 5075 to another expansion unit" on
page 9.
Make sure that you have powered down your system unit before you begin. See
"Powering down your system unit" on page 3 for instructions.
If you encounter difficulties during the installation, contact your authorized dealer
or service provider.
© Copyright IBM Corp. 2000
7