Sending Documents From Memory - Sharp UX-84 Operation Manual

all-UX84H.book Page 103 Wednesday, July 5, 2000 8:48 AM
Downloaded from: http://www.usersmanualguide.com/

Sending Documents From Memory

With this function, the original document is scanned immediately,
stored in memory, and then transmitted once the connection to the
receiving machine is made. This is convenient when transmitting to
places where the line is often busy, as it saves you from waiting to
pick up the original document. After transmission, the document will
be cleared from memory.
♦ Only one memory transmission can be set at a time.
♦ The amount of memory currently occupied appears as a percentage
in the display while the document is being scanned.
1
Load the document(s).
The display will show:
READY TO SEND
• Set the resolution and/or contrast if
desired.
2
Press the START/MEMORY key
and then 1.
The display will show:
ENTER STATION #
Sending Documents From Memory
RESOLUTION
RECEPTION MODE
START/
1
MEMORY
103