Sharp UX-40 Operation Manual page 75

al l - ux40. book
Downloaded from: http://www.usersmanualguide.com/
Page 53 Thur s day, Novem ber 18, 1999
Explanation of headings
The fax number of the other machine involved in the
SENDER/
RECEIVER transaction. If this machine does not have an ID function,
the communication mode will appear (for example,
"G3").
Number of pages transmitted or received.
PAGES
OK - Transmission/reception was normal.
NOTE
P.FAIL - A power failure occurred. If you have power
and the problem persists, try a different outlet. If
necessary, have an electrician check your power lines.
JAM - A problem with the paper or original document
occurred. Make sure the paper or document is loaded
properly. Make sure the operation panel is shut securely.
NO PAPER - You ran out of paper during reception.
COM.E-0 to COM.E-7 - A telephone line error
prevented the transaction. See Line Error in Chapter 10.
CANCEL - Transmission was cancelled because the
STOP key was pressed, no document was in the feeder,
or the other machine requested transmission using a
function which your fax does not have. If you were
attempting to fax, make sure a document is in the feeder.
If you were receiving, contact the faxing party to see how
they are trying to send to you.
2: 35 PM
Sending a Fax by Automatic Dialling
53