Sharp UX-40 Operation Manual page 57

al l - ux40. book
Downloaded from: http://www.usersmanualguide.com/
Page 35 Thur s day, Novem ber 18, 1999
Loading the Document
Up to 5 pages can be placed in the feeder at one time. The pages will
automatically feed into the machine starting from the bottom page.
♦ If you need to send or copy more than 5 pages, place the additional
pages (up to the maximum allowed) gently and carefully in the
feeder just before the last page is scanned. Do not try to force them
in, as this may cause double-feeding or jamming.
♦ If your document consists of several large or thick pages which
must be loaded one at a time, insert each page into the feeder as the
previous page is being scanned. Insert gently to prevent double-
feeding.
1
Adjust the document guides to the
width of your document.
2
Place the document face down and
push it gently into the document
feeder. The top edge of the document
should enter the machine first.
• The feeder will draw the leading
edge of the document into the
machine. The display will show:
READY TO SEND
2: 35 PM
Loading the Document
35