Sharp UX-40 Operation Manual page 70

al l - ux40. book
Downloaded from: http://www.usersmanualguide.com/
Page 48 Thur s day, Novem ber 18, 1999
Sending a Fax by Automatic Dialling
Speed Dialling
Speed Dialling can be used to dial any number that has been stored for
Automatic Dialling.
1
Load the document(s).
The display will show:
READY TO SEND
• Set the resolution and/or contrast if
desired.
2
Press the SPEED DIAL key and then
enter the Speed Dial number by
pressing the numeric keys.
• To enter numbers 1 through 9, first
enter 0 and then the number.
3
Check the display. If the name or
number shown is correct, press the
START key. (If not, press the STOP
key and then repeat Step 2.)
48
2: 35 PM
RESOLUTION/
RECEPTION MODE
SPEED
DIAL
0
(Example)
START
9