Sharp UX-40 Operation Manual page 69

al l - ux40. book
Downloaded from: http://www.usersmanualguide.com/
Page 47 Thur s day, Novem ber 18, 1999
Rapid Key Dialling
If the number you want to dial has been stored for Automatic Dialling
as a Speed Dial number from 01 to 05, you can dial it by pressing the
corresponding Rapid Key.
1
Load the document(s).
The display will show:
READY TO SEND
• Set the resolution and/or contrast if
desired.
2
Press the Rapid Key for the desired
Speed Dial number as follows:
Speed Dial 01: Rapid Key A
Speed Dial 02: Rapid Key B
Speed Dial 03: Rapid Key C
Speed Dial 04: Rapid Key D
Speed Dial 05: Rapid Key E
• The name of the receiving party
will appear in the display. If no
name was stored, the fax number
will appear. (If the name or number
is incorrect, press the STOP key.)
• The document will be automatically
transmitted once the connection is
established.
2: 35 PM
Sending a Fax by Automatic Dialling
RESOLUTION/
RECEPTION MODE
A
Example: To dial Speed
Dial number 01, press
Rapid Key A.
47