Table of Contents
Advertisement
7. Being careful not to damage the components on the center plane, use the handle
8. Remove the SMP Expansion Module cover:
16
Installation Guide
Latch
and the finger relief on the SMP Expansion Module cover to lift the SMP Expan-
sion Module out of the server.
a. Place the SMP Expansion Module on a flat, level surface.
b. Rotate the two locking levers until they are fully extended beyond the edge of
the SMP Expansion Module cover. Do not force the locking levers past the
position shown in the illustration.
Cam
Locking
levers
Finger relief
Handle
Advertisement
Table of Contents
