Samsung SNT-1010 User Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Server
  5. SNT-1010
  6. User manual
Samsung SNT-1010 User Manual

Samsung SNT-1010 User Manual

1ch video server
Hide thumbs Also See for SNT-1010:
Table of Contents

Advertisement

Quick Links

Download this manual
Enlarged version
Safety instructions and precautions are designed to protect
users and prevent any property damage.
Please read and observe these instructions thoroughly before
using the SNT-1010.
SNT-1010
SNT-1010 1CH Video Server
User's manual
AB68-00610A

Advertisement

Table of Contents
loading

Related Manuals for Samsung SNT-1010

Summary of Contents for Samsung SNT-1010

  • Page 1 Safety instructions and precautions are designed to protect users and prevent any property damage. Please read and observe these instructions thoroughly before using the SNT-1010. SNT-1010 SNT-1010 1CH Video Server User’s manual AB68-00610A...

  • Page 2: Features

    Preparation Preparation Features Before You Start Before you start, please read the following descriptions. Icons for the Safety Precautions Various Communication Protocol Support Monitoring Through Web Browser This product supports support various Icon Name Description Monitoring Through Web Browser This communication protocols such as ARP, product enables watching a video through Warning If you do not follow the instructions marked with this label, it may cause a serious physical damage.

  • Page 3: Table Of Contents

    Web Browser : Internet Explorer 5.0 or later DirectX 8.1 or later Viewer Screen Buttons and Functions ..45 Chapter 3 Network Connection & Setup Chapter 8 Setting Up To Connect SNT-1010 to an IP sharer with the xDSL/Cable modem ......20 Compatible IP Sharers Setting SNT-1010 ........

  • Page 4: Safety Precautions

    Do not place metal matters over product, because using them Do not spray water SNT-1010 such as a screw driver, may deteriorate or remove the Do not install the product in a painting. directly onto the product coin, metal parts, etc.,or a...

  • Page 5: View Of Snt-1010

    Red : When the file upload is in process or the NTP connection has failed Blinking Red : If SNT-1010 causes a problem or you reset the system to the factory Slide the [IP Select Switch ] left or right to position it to <D>or <S>.

  • Page 6: Chapter 2 Installing And Connecting

    RS-485/Alarm Port (2 Big and 4 Small Screws) The latest version of the software is available on Samsung Electronics web site (http://www.samsung.com). Insert the Fixing Block onto a side of the product and turn it in the arrow direction as described in the figure.

  • Page 7: Connecting Snt-1010

    To install onto a dedicated shelf Assemble as follows for both sides of the main body. You can use the rear port of SNT-1010 to connect to the RS-485 device. You can install and control over a PTZ camera that supports RS-485 communications.
  • Page 8 Connect the [VIDEO IN ] port of the SNT-1010 and the VIDEO OUT port of the camera. SNT-1010 Connect the [AUDIO IN ] port of the SNT-1010 and the AUDIO OUT port of the camera. If the camera provides an AUDIO OUT port. Camera...
  • Page 9 Computer LINE-OUT Network Pre-Amp SPEAKER Microphone Connect the [AUDIO IN ] port of the SNT-1010 with the LINE OUT portof the amplifier that the Microphone Pre-Amp Pre-Amp microphone is connected to. SPEAKER Connect the [AUDIO OUT ] port of the SNT-1010 with the LINE IN port of the speaker.

  • Page 10: Chapter 3 Network Connection & Setup

    - D-LINK DI-624 - NETGEAR WGT624 Do not use other IP sharers than SNT-1010 authorized ones.Otherwise, it can cause a network error. Depending on the performance of the PC (Viewer installed)or the network,the video transmission can be Connect the AC adapter to the Power port of the SNT-1010.

  • Page 11: To Connect Snt-1010 To An Ip Sharer With The Xdsl/Cable Modem

    Network Connection & Setup To Connect SNT-1010 to an IP sharer This is for a small network environment such as homes, SOHO and ordinary shops. with the xDSL/Cable modem [ STEP 2 ] To connect the IP sharer to a xDSL /Cable modem A.
  • Page 12 IP Sharer. ISP are displayed. Please remember these values because they are required so that an external remote computer of the IP sharer connects to SNT-1010. However, note that certain Enter the IP Sharer’s address in the ISPs change the settings of <IP Address>, <Subnet Mask>and <Gateway>on a regular basis...
  • Page 13 (Continued) Connect SNT-1010 to an IP sharer with local area networking as corporate office, building, public office and factory. [ STEP 5 ] To connect a local PC in the IP sharer to SNT-1010 SNT-1010 1 Switch SNT-1010 2 IP Sharer...

  • Page 14: Connect Snt-1010 To An Ip Sharer With Local Area Networking

    Connect SNT-1010 to an IP sharer with local area networking (Continued) [ STEP 3 ] To connect SNT-1010 to the IP sharer [ STEP 2 ] To configure the network settings of the IP Sharer Launch an Internet browser on the local PC A.
  • Page 15 SNT-1010 found in the address bar to connect to it. ex) http://192.168.1.2 A remote PC in an external Internet out of the LAN network may not be able to connect to SNT-1010 installed Note in the intranet if the port-forwarding is not properly set or a firewall is set. In this case, to resolve the problem,...

  • Page 16: Connect Snt-1010 Directly To A Dhcp-Based Xdsl/Cable Modem

    For the DDNS URL address, refer to “To check the DDNS address” on page 41. A remote PC in an external Internet out of the LAN network may not be able to connect to SNT-1010 installed in the intranet if the port-forwarding is not properly set or a firewall is set. In this case, to resolve the problem, Note To check if your xDSL / Cable modem uses DHCP, contact your Internet Service Provider.

  • Page 17: Searching For Snt-1010

    <Mode> : Shows the current selection among from <Static>and <Dynamic>. Set up the IP related settings in the <ADDRESS>field. <Mac Address> : The Mac address of the network interface of SNT-1010 that is printed on the rear panel. <MAC Address> : The MAC Address printed on the <IP Address>...
  • Page 18 Static IP Setting Manual Network Setting (Continued) If more than one SNT-1010 are connected to an IP Sharer In the <PORT>fields,set up port numbers. <HTTP Port> : A HTTP port used to connect to set the IP and port Settings for SNT-1010’s differently.

  • Page 19: Automatic Network Setting

    In the initial run, the [Auto Set] and [Manual Set] button are all disabled. - If SNT-1010 is installed on an IP sharer and obtains an IP using DHCP - If sNT-1010 is connected directly to a xDSL/Cable modem using DHCP...

  • Page 20: Dynamic Ip Setting

    SNT-1010 connected to the IP Sharer. Each of the port numbers for the IP Sharer must be When you run the IP Installer on your local PC, the SNT-1010 with a dynamic IP according to those presented in <BASIC allocated is listed.

  • Page 21: Connecting To Snt-1010

    <00:00:f0>, <m> if <00:16:6c>, and <p> if <00:68:36>. Example) IP Address : 192.168.1.200 http://192.168.1.200 Example) - If the MAC address of SNT-1010 is 00 : 00 : f0 : ff : fe : 42 : - The Login screen appears. e + fffe42 + websamsung.net = efffe42.websamsung.net - If the MAC address of SNT-1010 is 00 : 16 : 6c : ff : fe : 42 : m + fffe42 + websamsung.net = mfffe42.websamsung.net...

  • Page 22: Installing Activex

    If you have changed the old password, type the new password here. Click the [Log In] button. When the login is complete, the SNT-1010 Viewer screen appears. If you have not installed DirectX 8.1 or later on your Windows 2000-based PC and try to log in, you may not see any video image on the screen.

  • Page 23: Using The Viewer Screen

    The default logo is Samsung Electronics logo. Shows the current video codec information among from <MJPEG> and <MPEG4>. SNT-1010 provides Dual Codec function so that it can apply 2 codecs to a video source simultaneously and transmit it. You can change the setting in the <BASIC CONFIGURATION>...
  • Page 24 This function is not available while playing a recorded file. If the screen size is <SINGLE>, this function is available only when more than 1 SNT-1010 are in the <SNT-1010 List>. If the screen size is <QUAD>, this function is available only when more than 4 SNT-1010 are in the <SNT-1010 List>...

  • Page 25: Setting Snt-1010

    RS485 ALARM INPUT4 This function works only in a camera supporting the power pan-and-tilt. Ex) Samsung SCC-6475 MOTION DETECTION If you click over a point you want, this function moves the camera so that the point comes to the center of the screen.

  • Page 26: Basic Configuration

    - <D1>: 720 x 480 (NTSC), 720 x 576 (PAL) - <HTTP Webserver Port> : Shows the HTTP port used to connect to the SNT-1010 using the web browser.The default port number is 80(TCP). - <VGA> : 640 x 480 (NTSC), 640 x 576 (PAL) - <Device Port(TCP)>...
  • Page 27 Setting Up Basic Configuration (Continued) To setup users To modify a registered user account Click <BASIC CONFIGURATION> <USER>. Select the <Select> check box of a user account to be modified in The USER window appears. the USER window. Click the [Modify] button in the USER window. The <Modify User>...
  • Page 28 SNT-1010. You can change the SNT-1010 name. <SNT-1010 List> : Shows the list of external SNT-1010’s added by the user. You can add up Select the <Select> check box of an SNT-1010 to be deleted in the EXTERNAL SNT-1010 window.

  • Page 29: System Configuration

    Setting Up Setting Up Basic Configuration System Configuration (Continued) To set the record/capture saving path To setup date and time You can get the current system time from a NTP server and set the system time. Click <BASIC CONFIGURATION> <LOCAL SAVE PATH>. Click <SYSTEM>...
  • Page 30 <Current Status> : Shows the number of users connected to the current system and the IP addresses of them. The connection status is updated every 5 seconds. To download the latest version of the software, visit Samsung Electronics web site www.samsung.com.
  • Page 31 <Factory Default> : Initializes the system settings to the factory settings and then restarts the system. The settings must be the same as those of the camera connected to the SNT-1010. Notice - <Except Network Parameter>: Initializes the system settings except network settings.

  • Page 32: Layout Configuration

    Setting Up Layout Configuration You can display image, text, logo and banner on the screen. To set an overlay image To upload an image Click <LAYOUT> <OVERLAY In the OVERLAY IMAGE window, click the [Browse] IMAGE>. button. The OVERLAY IMAGE window The Select File window appears.
  • Page 33 - <Select existing image> : You can select a logo from the uploaded logo files. <Show EncoderBox ip> : Determines whether to display SNT-1010 IP address on the top screen. Click the [Remove] button to remove the selected logo file.
  • Page 34 Setting Up Layout Configuration (Continued) To view HTML code To upload a logo Click <LAYOUT> <VIEW In the Modify Screen Look screen, click the HTML>. [Browse] button. The HTML Code Viewer window The Select File window appears. appears. Select a file path and click [Open]. The files in the path are displayed.

  • Page 35: Event Configuration

    Event Configuration To set the image transmission function To test FTP transmission You can set an FTP/email(SMTP) server to send the prior/posterior alarm image saved in the SNT-1010 Click the [Test] button. when an alarm is generated. Connect to the configured FTP server and conduct image Click <EVENT>...
  • Page 36 <Transfer Mode> : You can select a method to send an alarm image from the <FTP> and <E-Mail>. SNT-1010. <Transferred Image Naming> : You can set the file name of an alarm image to be sent whenan alarm is generated or during the scheduled transfer.
  • Page 37 Setting Up Event Configuration (Continued) To set the motion detection function To set a motion detection target area You can set a specific area to detect a motion in. Click <EVENT> <MOTION In the MOTION DETECTION window, click the [Motion DETECTION>.
  • Page 38 To set video signal loss detection function To set scheduled transmission You can set an alarm to be generated when the video signal from a camera to SNT-1010 is lost. You can have a JPEG image sent through FTP or email periodically.

  • Page 39: Network Configuration

    Setting Up Network Configuration To set video streaming To set IP address automatic notification You can control the data transfer rate according to the SNT-1010 video streaming type and network bandwidth. Click <NETWORK> <IP NOTIFICATION>. Click <NETWORK> <STREAMING SETUP>. The IP NOTIFICATION window appears.

  • Page 40: Chapter 9 Appendix

    Since if the product is reset, all settings are initialized, you must configure basic network settings such as IP Address, Subnet Example) - If the MAC address of SNT-1010 is 00 : 00 : f0 : ff : fe : 42 : Notice Mask, Gateway, etc., using the <IP Installer.exe>...

  • Page 41: Trouble-Shooting

    First, check if the banner-linked page is currently available. If your SNT-1010 is connected to the xDSL networks, check if the <Bandwidth>is set to 600 kbps or less. I created a new HTML page using the HTML tag editor provided by <Viewer HTML>.

  • Page 42: Specifications

    Alarm I/O Output 1 (24VDC 40mA Max) Relay OUT (30VDC 2A,125VAC 0.5A Max) When I connect SNT-1010 to the power source, the status indicator keeps blinking in red and I Image transfer : FTP, E-mail Alarm Input can’t connect to the network using the browser.

  • Page 43: Gpl/Lgpl Software License

    Appendix Specifications GPL/LGPL Software License (Continued) Half / Full duplex Mode, PTZ Control RS485 Auto pan, preset, scan, pattern, Pan / Tilt / Zoom control PTZ control Power PTZ function support IP installation function IP Installer Ip address installation This product uses open-source software distributed under the terms of GPL and LGPL. (XP, win 2000 support ) Software upgrade by web browser Software Upgrade...
  • Page 44 of the software, or if you modify it. containing the Program or a portion of it, part contains or is derived from the distribution medium does not bring the other For example, if you distribute copies of such a either verbatim or with modifications Program or any part thereof, to be work under the scope of this License.
  • Page 45 component itself accompanies the executable. 7. If, as a consequence of a court original copyright holder who places the PARTIES PROVIDE THE PROGRAM If distribution of executable or object code is judgment or allegation of patent infringement Program under this License may add an "ASIS"...
  • Page 46 of each source file to most effectively convey whatever suits your program. all its users. library. Also, if the library is modified by the exclusion of warranty ; and each file You should also get your employer This license, the Lesser General Public someone else and passed on, the recipients should have at least the "copyright"...
  • Page 47 For example, on rare occasions, there may be A "library" means a collection of software option offer warranty protection in same sections as part of a whole which is a a special need to encourage the widest functions and/or data prepared so as to be exchange for a fee.
  • Page 48 on a medium customarily used for software the object code for the work under the terms time a copy of the library already present on provided that the separate distribution of interchange. of Section. the user's computer system, rather than the work based on the Library and of the If distribution of object code is made by offering Any executables containing that work also fall...
  • Page 49 link with or modify the Library subject to This section is intended to make thoroughly 15.BECAUSE THE LIBRARY IS LICENSED If you develop a new library, and you want it to these terms and conditions.You may not clear what is believed to be a consequence o f FREE OF CHARGE, THERE IS NO be of the greatest possible use to the public, impose any further restrictions on the...
  • Page 50 names: OpenSSL Toolkit (http://www.openssl.org/)" terms except that the holder is Tim Hudson THE AUTHOR OR CONTRIBUTORS BE Yoyodyne, Inc., hereby disclaims all copyright THIS SOFTWARE IS PROVIDED BY THE (tjh@cryptsoft.com). LIABLE FOR ANY DIRECT, INDIRECT, interest in the library `Frob'(a library for OpenSSL PROJECT “AS IS”...
  • Page 51 MEMO Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.

Table of Contents