Dodge CHALLENGER 2020 Owner's Manual page 381

380 MULTIMEDIA
NOTE:
For phones which are not made a favorite, the
phone priority is determined by the order in
which it was paired. The latest phone paired will
have the higher priority.
You can also use the following VR commands to
bring up the Paired Phone screen from any
screen on the radio:
"Show Paired Phones" or

"Connect My Phone"

Pair A Bluetooth® Streaming Audio Device
1. Press the Media button on the
touchscreen to begin.
2. Change the Source to Bluetooth®.
3. Press the Bluetooth® button on the
touchscreen to display the Paired Audio
Devices screen.
4. Press the Add Device button on the
touchscreen.
NOTE:
If there is no device currently connected with
the system, a pop-up will appear.
5. Search for available devices on your
Bluetooth®-enabled audio device. When
prompted on the device, enter the PIN
shown on the Uconnect screen.
6. Uconnect Phone will display an in process
screen while the system is connecting.
7. When the pairing process has successfully
completed, the system will prompt you to
choose whether or not this is your favorite
device. Selecting "Yes" will make this
device the highest priority. This device will
take precedence over other paired devices
within range.
NOTE:
For devices which are not made a favorite, the
device priority is determined by the order in
which it was paired. The latest device paired will
have the higher priority.
You can also use a following VR command to
bring up a list of paired audio devices:
"Show Paired Phones" or

"Connect My Phone"

Connecting To A Particular Mobile Phone Or
Audio Device After Pairing
Uconnect Phone will automatically connect to
the highest priority paired phone and/or Audio
Device within range. If you need to choose a
particular phone or Audio Device follow these
steps:
1. Press the Phone Settings button on the
touchscreen.
2. Press the Paired Phones or Paired Audio
Sources button on the touchscreen.
3. Press to select the particular Phone or the
particular Audio Device. A pop-up menu will
appear, press "Connect Phone".
4. Press the X button to exit out of the Settings
screen.
Disconnecting A Phone Or Audio Device
1. Press the Phone Settings button on the
touchscreen.
2. Press the Paired Phones or Paired Audio
Devices button on the touchscreen.
3. Press the Settings button located to the
right of the device name.