Normal Starting - Dodge CHALLENGER 2020 Owner's Manual

Hide thumbs Also See for CHALLENGER 2020:
Table of Contents

Advertisement

Tip Start Feature — Automatic
Transmission
Place the ignition in the START mode and release
it as the starter engages. The starter motor will
automatically disengage itself once engine is
running. If the engine fails to start, the starter will
disengage automatically in 10 seconds. If this
occurs:
1. Place the ignition in the OFF mode.
2. Wait 10 to 15 seconds.
3. Repeat the "Normal Starting" procedure.
N
S
ORMAL
TARTING
To Turn On The Engine Using The ENGINE
START/STOP Button — Manual
Transmission Only
1. Press and hold the clutch pedal while
pushing and holding the ENGINE START/
STOP button.
2. Release the ENGINE START/STOP button
when the engine starts. If the vehicle fails
to start within 15 seconds, release the
ENGINE START/STOP button, wait 10 to
15 seconds, then repeat the "Normal
Starting" procedure.
3. If you wish to stop the cranking of the
engine prior to the engine starting, release
the ENGINE START/STOP button.
NOTE:
Normal starting of either a cold or a warm
engine is obtained without pumping or pressing
the accelerator pedal.
To Turn On The Engine Using The ENGINE
START/STOP Button — Automatic
Transmission Only
1. The transmission must be in PARK.
2. Press and hold the brake pedal while
pushing the ENGINE START/STOP button
once.
3. The system takes over and attempts to start
the vehicle. If the vehicle fails to start, the
starter will disengage automatically after
10 seconds.
STARTING AND OPERATING
4. If you wish to stop the cranking of the
engine prior to the engine starting, push the
ENGINE START/STOP button again.
NOTE:
Normal starting of either a cold or a warm
engine is obtained without pumping or pressing
the accelerator pedal.
To Turn Off The Engine Using ENGINE
START/STOP Button — Manual
Transmission Only
1. With the vehicle stopped, place the gear
selector in NEUTRAL, then push and
release the ENGINE START/STOP button.
2. The ignition will return to the OFF mode.
3. Place the gear selector in FIRST gear or
REVERSE and then apply the parking brake.
157
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents