Changing The Print Settings - Epson Stylus Color 980 Manual

EPSON Stylus PRO
EPSON Stylus COLOR 500
EPSON Stylus COLOR II
LQ-860
LQ-2550
Note:
The drivers for the printers listed above do not allow access to all of the
features offered by the EPSON STYLUS COLOR 980, such as 720-dpi
printing, 1440-dpi printing, and MicroWeave.
DOS software varies greatly. See the printing section of your
software manual for information on accessing the printer driver
settings.

Changing the Print Settings

You can change many print settings such as print direction and
loading position. Because these settings take effect each time you
turn on the printer, they are also called default settings.
The factory default settings are designed to meet the needs of
most users, so you may not need to change them. The table below
lists the features you can select in the default-setting mode.
Settings
Font
Pitch
Print direction
Loading position
I/F mode
Auto I/F wait time
12-2
Using the Printer Software for DOS
Options
Courier, Roman, Sans Serif, Prestige, Script,
Roman T, Sans Serif H, Draft
10 cpi, 12 cpi, 15 cpi, 17.1 cpi, 20 cpi,
Proportional
Auto, Bi-D, Uni-D
8.5 mm, 3 mm, Others
Auto, Parallel, USB
10 seconds, 30 seconds