Epson Stylus Color 980 Manual page 85

2. Double-click the System icon, then click the Device
Manager tab.
3. Double-click the Ports (COM & LPT) icon and then LPT1. If
you have connected your printer to a port other than LPT1,
double-click the appropriate port icon.
4. Click the Resources tab, then clear the Use automatic
settings check box. Write down the Input/Output Range
settings shown in the resource settings box.
5. Select a basic configuration setting from the Setting based on
list that uses the same Input/Output Range settings as those
you wrote down in Step 4, and make sure that the Direct
Memory Access channel and Interrupt Request numbers are
allocated and displayed. Confirm also that the Conflicting
device list box shows No conflicts.
6. Click OK to save the settings.
7. Reopen the Speed & Progress dialog box to confirm that DMA
transfer has been enabled.
Using the Printer Software for Windows
3-49