Table of Contents
Advertisement
9
USB 3:
10 PC IN:
11 DisplayPort IN:
12 HDMI IN 1,
HDMI IN 2:
13 DVI-D IN:
14 AUDIO IN 1,
AUDIO IN 2:
15 SLOT:
Note
●
For the compatible function board, consult the dealer
where you purchased the product.
20
English
USB Terminal
Connect the USB memory to use
"USB media player" or "Memory
viewer". Also, this can be used to
supply power of up to 5 V/0.9 A
to an external device when the
picture is displayed.
(see page 27)
PC Input Terminal
Connect to video terminal of PC,
video equipment with "YP
YC
C
" or "RGB" output.
B
R
(see page 23)
DisplayPort Input Terminal
(Supports 4K picture)
Connect to PC or video
equipment with DisplayPort
terminal.
(see page 24)
HDMI Input Terminal
(2 systems)
Connect to video equipment with
HDMI output.
(see page 21)
DVI-D Input Terminal
Connect to video equipment with
DVI-D output.
(see page 22)
Analogue Audio Input Terminal
(2 systems)
(see page 22, 23)
Expansion slot
(see page 14)
Before connecting
●
Before connecting cables, carefully read the operating
instructions for the external device to be connected.
●
Turn off the power of all devices before connecting
cables.
●
Take note of the following points before connecting
the cables. Failure to do so may result in
malfunctions.
When connecting a cable to the unit or a device
•
connected to the unit itself, touch any nearby
metallic objects to eliminate static electricity from
P
/
B
R
your body before performing work.
Do not use unnecessarily long cables to connect
•
a device to the unit or to the unit body. The
longer the cable, the more susceptible to noise it
becomes. Since using a cable while it is wound
makes it act like an antenna, it is more susceptible
to noise.
When connecting cables, insert them straight into
•
the connecting terminal of the connecting device
so that the ground is connected first.
●
Acquire any cable necessary to connect the external
device to the system that is neither supplied with the
device nor available as an option.
●
If the outer shape of the plug of a connection cable is
large, it may come in contact with the periphery such
as a back cover or the plug of an adjacent connection
cable. Use a connection cable with the suitable plug
size for the terminal alignment.
●
When connecting the LAN cable with plug cover, be
aware that the cover may come in contact with the
back cover and it may be difficult to disconnect.
●
If video signals from video equipment contain too
much jitter, the images on the screen may wobble.
In this case, a time base corrector (TBC) must be
connected.
●
When the sync signals output from PC or video
equipment are disturbed, for example, when changing
settings of video output, the colour of the video may
be disturbed temporarily.
●
The unit accepts YP
analogue RGB signals (PC IN) and digital signals.
●
Some PC models are not compatible with the unit.
●
Use cable compensator when you connect devices to
the unit using long cables. Otherwise the image may
not be displayed properly.
●
Refer to "Preset Signals" (see page 155) for the types
of video signals that can be displayed with the unit.
P
/YC
C
signals (PC IN),
B
R
B
R
Advertisement
Table of Contents
