Technical Data - Graco ThermoLazer 258699 Operation

Pavement marking system
Hide thumbs Also See for ThermoLazer 258699:
Table of Contents

Advertisement

Technical Data

Technical Data
Fuel:
Gas supply pressure (maximum):
Kettle burner inlet pressure:
IR burner inlet pressure:
Torch inlet pressure:
Kettle main burner heating capacity (maximum): Two (2) burners; each burner rated at 10,100 btu/hr (2.96 kW)
Kettle pilot burner heating capacity (maximum):
IR burner heating capacity (maximum):
Torch heating capacity (maximum):
Kettle holding capacity (maximum):
Kettle Temperature (maximum):
Kettle Temperature (operating):
Tire pressure (rear wheels):
Tire pressure (swivel wheel):
Battery (Kettle Pilot Burner Igniter):
Bead Hopper Capacity (maximum):
Dimensions
Weight:
Length:
Height:
Width:
22
Liquefied petroleum gas (LP-gas) (propane vapor)
250 psi (17.24 bar)
11 in. w.c. (2.7 kPa)
12 psi (.83 bar)
18 psi (1.24 bar)
3800 btu/hr (1.11 kW)
14,000 btu/hr (4.10 kW)
100,000 btu/hr (29.31 kW)
300 lb (136 kg) (thermoplastic traffic marking compound materials)
450° F (232° C)
380° - 420° F (193° - 216° C) 60 psi (4.14 bar)
60 psi (4.14 bar)
45 psi (3.10 bar)
AA (1.5 V)
80 lb (36.3 kg) Type II glass beads
295 lb (134 kg)
72 in. (1.83 m)
51 in. (1.30 m)
48 in. (1.22 m)
313787C

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thermolazer 257500

Table of Contents