Placing A Call; Calling A Person To Visit - Aiphone IXG Series Operation Manual
Entrance station, entrance station (hid-compatible)
Hide thumbs
Also See for IXG Series:
- Installation manual (28 pages) ,
- Quick start programming manual (25 pages) ,
- Commercial quick start programming manual (9 pages)
Table of Contents
Advertisement
3
How to use
Placing a call
Calling a Person to Visit
Calling using the keypad
The keypad can be used to call a tenant by entering their Unit Number.
Depending on the settings of this station,
may not be displayed. In this case, it cannot be used.
Refer to
"Displaying Operation Screens (→page 16)"
for information on how to display operation screens.
Select the appropriate building if the Building Selection Screen is displayed first.
1.
2.
Enter the "Unit Number".
Tap
.
• The ringback tone or audio guidance will be
• Use
to delete incorrectly entered Unit
played.
Numbers.
17
- Quick Links:
- Error Screen Troubleshooting
Hide quick links:
Advertisement
Table of Contents
