Resetting All Remote Control Codes - Yamaha RX-V659 Owner's Manual

■ Setting remote control XM ID library
codes (U.S.A. model only)
Select one of the following codes to set the remote control
XM ID library code for the component you want to use.
1
Press XM to select "XM" as the input source.
2
Press CODE SET using a ballpoint pen or a
similar object.
The TRANSMIT indicator on the remote control
flashes twice.
CODE SET
3
Press the numeric buttons to enter the code
number "81918" or "81919".
The TRANSMIT indicator on the remote control
flashes twice, and the XM ID library code is changed.
STEREO MUSIC ENTERTAIN MOVIE
1 2 3
STANDARD SELECT EXTD SUR. PURE DIRECT
5 6 7
SPEAKERS ENHANCER NIGHT STRAIGHT
9 0 10
EFFECT
XM ID
library code Function
*1
81918 To operate this unit using
(initial setting) the default code.
To operate this unit using
81919
an alternative code.
*1
The remote control setting
*2
The setting of this unit (see page 98)
Notes
• You need to set the corresponding remote control XM ID
of this unit in the advanced setup (see page 98).
• When using multiple YAMAHA receivers/amplifiers, you
may be able to operate the other components
simultaneously with the default code setting. In this case,
set one of the alternative codes to operate this unit
separately.
XM
TRANSMIT
Flashes
4
TRANSMIT
8
Flashes
ENT.
Remote
control XM
ID *2
ID1
(initial setting)
ID2

Resetting all remote control codes

Use this feature to clear all the remote control codes
previously set and reset all of them to the initial factory
settings.
1
Press CODE SET using a ballpoint pen or a
similar object.
The TRANSMIT indicator on the remote control
flashes twice.
CODE SET
2
Press the numeric buttons to enter the code
number "9981".
The TRANSMIT indicator on the remote control
flashes twice, and all the remote control codes
previously set are cleared and reset to the initial
factory settings.
STEREO MUSIC ENTERTAIN MOVIE
1 2 3
PURE DIRECT
STANDARD SELECT EXTD SUR.
5 6 7
SPEAKERS ENHANCER NIGHT STRAIGHT
ENT.
9 0 10
EFFECT
y
If you do not press any buttons within 30 seconds after step
2, the clearing process is canceled. In this case, repeat the
clearing procedure.
REMOTE CONTROL FEATURES
TRANSMIT
Flashes
4
TRANSMIT
8
Flashes
103