Input Menu - Yamaha RX-V659 Owner's Manual

SET MENU

2 INPUT MENU

Use this menu to reassign the input/output jacks, select the
input mode or rename the input source.
2 INPUT MENU
. A)I/O ASSIGNMENT
B)INPUT MODE
C)INPUT RENAME
D)VOLUME TRIM
[ ]/[ ]:Up/Down
[ENTER]:Enter
■ Input/output assignment
A)I/O ASSIGNMENT
Use this feature to assign the input/output jacks according
to the component to be used if the initial settings of this
unit do not correspond to your needs. Change the
following parameters to reassign the respective jacks and
effectively connect more components.
Once the input/output jacks are reassigned, you can select
the corresponding component by using the INPUT
selector on the front panel (or the input selector buttons on
the remote control).
For COMPONENT VIDEO jacks A, B and C
CMPNT-V INPUT [A]
CMPNT-V INPUT [B]
CMPNT-V INPUT [C]
Choices: [A] DVD, DTV/CBL, V-AUX, VCR, DVR
[B] DVD, DTV/CBL, V-AUX, VCR, DVR
[C] DVD, DTV/CBL, V-AUX, VCR, DVR
CMPNT-V INPUT
. [A];;;;;
[B];;;;;DTV/CBL
[C];;;;;
For OPTICAL OUTPUT jack 1 OPTICAL OUT (1)
Choices: PHONO, CD, MD/CD-R, DVD, DTV/CBL,
V-AUX, VCR, DVR
OPTICAL OUT
. (1);;;;;MD/CD-R
92
DVD
( DVD )
(DTV/CBL )
DVR
( DVR )
(MD/CD-R )
For OPTICAL INPUT jacks 2, 3 and 4
OPTICAL IN (2)
OPTICAL IN (3)
OPTICAL IN (4)
Choices: (2) PHONO, CD, MD/CD-R, DVD, DTV/CBL,
VCR, DVR
(3) PHONO, CD, MD/CD-R, DVD, DTV/CBL,
VCR, DVR
(4) PHONO, CD, MD/CD-R, DVD, DTV/CBL,
VCR, DVR
OPTICAL IN
. (2);;;;;MD/CD-R
(3);;;;;
(4);;;;;DTV/CBL
For COAXIAL INPUT jacks 5 and 6
COAXIAL IN (5)
COAXIAL IN (6)
Choices: (5) PHONO, CD, MD/CD-R, DVD, DTV/CBL,
V-AUX, VCR, DVR
(6) PHONO, CD, MD/CD-R, DVD, DTV/CBL,
V-AUX, VCR, DVR
COAXIAL IN
. (5);;;;;
(6);;;;;
Notes
• You cannot select a specific item more than once for the same
type of jack.
• When you connect a component to both the DIGITAL INPUT
(COAXIAL) and DIGITAL INPUT (OPTICAL) jacks, priority
is given to the signals input at the DIGITAL INPUT
(COAXIAL) jack.
(MD/CD-R )
DVD
( DVD )
(DTV/CBL )
CD
( CD )
DVD
( DVD )