Yamaha RX-V659 Owner's Manual page 41

■ If an error screen appears
Press u / d / j / i to select "RETRY" or "EXIT"
and then press ENTER.
The following display is an example where "E-9:USER
CANCEL" appears in the OSD.
ERROR
E-9:USER CANCEL
.
Don't operate
any function.
. >RETRY
[ ]/[ ]:Up/Down
[ENTER]:Enter
Choices: RETRY, EXIT
• Select "RETRY" to retry the "AUTO SETUP"
procedure.
• Select "EXIT" to exit from the "AUTO SETUP"
procedure.
EXIT
■ If a warning screen appears
Warning messages inform you of potential problems
detected during the "AUTO SETUP" procedure.
Note
Warnings differ from errors in that warnings do not cancel the
"AUTO SETUP" procedure.
1
Make sure the pointer is pointing at
"WARNING" and then press ENTER to
display the detailed information about the
warning.
RESULT:EXIT
. WARNING (3)
RESULT
.
SP :
.
DIST: 14.0/ 17.0ft
.
LVL : -9.0/ +6.5dB
>SET CANCEL
[ ]/[ ]:Up/Down
[ENTER]:Enter
y
The number on the right of "WARNING" indicates the
number of warning messages.
2
Press j / i repeatedly to toggle between the
warning displays.
RESULT:EXIT
. WARNING (3)
RESULT
.
SP :
.
DIST: 14.0/ 17.0ft
.
LVL : -9.0/ +6.5dB
>SET CANCEL
[ ]/[ ]:Up/Down
[ENTER]:Enter
y
• For details about each warning message, see the "AUTO
SETUP" section in "TROUBLESHOOTING" on
page 116.
• When the corresponding warning message is not
applicable to a speaker, "– –" is displayed instead.
3
Press ENTER to return to the top
"RESULT:EXIT" display.
PRESET/CH
ENTER
A-E/CAT. A-E/CAT.
AUTO SETUP
5/4/0.1
5/4/0.1
RESULT:EXIT
WARNING (3)
RESULT
.
SP : 5/4/0.1
.
DIST: 14.0/ 17.0ft
.
LVL : -9.0/ +6.5dB
. >SET CANCEL
[ ]/[ ]:Up/Down
[ENTER]:Enter
37