Resetting All Remote Control Codes - Yamaha RX-V765 Owner's Manual

Controlling other components with the remote control

Resetting all remote control codes

You can clear all the remote control codes previously set,
and reset all of them to the initial factory settings.
y
• Each of the steps described in this section should be performed within
one minute. Setting operation is automatically canceled when one minute
has passed since the last step. If the operation is cancelled, start again
from the beginning.
1
Press oCODE SET on the remote control
using a pointed object such as a tip of a
ballpoint pen.
cTRANSMIT on the remote control blinks twice.
2
Press jSETUP on the remote control.
3
Enter "9981" using mNumeric keys.
Once the initialization is complete, cTRANSMIT
on the remote control blinks twice. If it fails,
cTRANSMIT blinks six times. Repeat from
step 1.
54
En