Display Panel - Yamaha RX-V595A Owner's Manual

DISPLAY PANEL

1
Multi-information display
This displays various information, for example the station
frequency, preset station number and name of the selected
input source.
2
MEMORY indicator
When MEMORY is pressed, this indicator flashes for about five
seconds. During this period, the displayed station can be
stored in the memory.
3
AUTO TUNING indicator
This lights up when the unit is in the automatic tuning mode.
4
TAPE/MD MON indicator
This lights up when the tape deck (or MD recorder, etc.) is
selected as the input source by pressing TAPE/MD MON / EXT.
DECODER on the front panel or TAPE/MD on the remote control.
5
STEREO indicator
This lights up when an FM stereo broadcast with sufficient
signal strength is being received.
6
Signal-level indicator
This indicates the signal level of the station being received.
If multipath interference is detected, the indication decreases.
12
01RX-V595a-e/f1 12
7
indicators
Either "dts" indicator lights up when the built-in DTS decoder is
turned on.
The red "dts" indicator lights up when playing a CD or LD
encoded with DTS.
The orange "dts" indicator lights up when playing a DVD
encoded with DTS.
* An orange "dts" indicator may light up when playing a CD or
LD encoded with DTS after playing a video-CD or DVD on a
DVD/LD combi-player.
8
, and
" " lights up when the built-in Dolby Digital decoder is
on and the signals of the selected source encoded with Dolby
Digital are not in 2-channel. "
digital sound field processor is on, and "
when the built-in Dolby Pro Logic decoder is on. Depending on
the selected DSP program, both "
both " " and " " will light up.
9
SLEEP indicator
This lights up while the built-in SLEEP timer is functioning.
6/24/99, 11:42 AM
indicators
" lights up when the built-in
" lights up
" and " ", or