Yamaha RX-V595a Service Manual

Hide thumbs Also See for RX-V595a:
Table of Contents

Advertisement

CONTENTS
To Service Personnel ........................................... 1
Remote Control Panels ....................................... 1
Front Panels ............................................................. 2
Rear Panels ........................................................... 3~4
Specifications ....................................................... 5~6
Internal View ............................................................ 7
Disassembly Procedures .................................... 7
Self Diagnosis Function ................................ 8~19
Factory Preset ...................................................... 20
1 0 0 6 7 9
RX-V595aRDS
SERVICE MANUAL
IMPORTANT NOTICE
This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA
Products, are already known and understood by the users, and have therefore not been restated.
WARNING:
Failure to follow appropriate service and safety procedures when servicing this product
may result in personal injury, destruction of expensive components, and failure of the
product to perform as specified. For these reasons, we advise all YAMAHA product
owners that any service required should be performed by an authorized YAMAHA
Retailer or the appointed service representative.
IMPORTANT:
The presentation or sale of this manual to any individual of firm does not constitute
authorization, certification or recognition of any applicable technical capabilities,
or establish a principle-agent relationship of any form.
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research,
engineering, and service departments of YAMAHA are continually striving to improve YAMAHA products.
Modifications are, therefore, inevitable and specifications are subject to change without notice or obligation
to retrofit. Should any discrepancy appear to exist, please contact the distributor's Service Division.
WARNING:
Static discharges can destroy expensive components. Discharge any static electricity
your body may have accumulated by grounding yourself to the ground buss in the unit
(heavy gauge black wires connect to this buss).
IMPORTANT:
Turn the unit OFF during disassembly and part replacement. Recheck all work before
you apply power to the unit.
Amp Adjustment ..................................................... 21
Tuner Adjustment ........................................... 22~25
Ic Data .................................................................. 26~36
Display Data ........................................................... 37
Block Diagram .................................................. 38~41
Printed Circuit Board ................................... 42~59
Schematic Diagram ......................................... 60~67
Parts List ............................................................ 68~85
Remote Control Transmitter ......................... 86
AV RECEIVER

Advertisement

Table of Contents
loading

Summary of Contents for Yamaha RX-V595a

  • Page 1 SERVICE MANUAL IMPORTANT NOTICE This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel. It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already known and understood by the users, and have therefore not been restated.
  • Page 2: Rx-V595A/Htr

    RX-V595a/HTR-5150/RX-V595aRDS TO SERVICE PERSONNEL 1. Critical Components information. Components having special characteristics are marked and must be replaced with parts having specifications equal to those originally AC LEAKAGE installed. WALL EQUIPMENT TESTER OR 2. Leakage Current Measurement (For 120V Model only).
  • Page 3: Front Panels

    RX-V595a/HTR-5150/RX-V595aRDS FRONT PANELS RX-V595a (U, C, R, T, A and L models) HTR-5150 (U, C, T and A models) RX-V595aRDS (B and G models)
  • Page 4: Rear Panels

    RX-V595a/HTR-5150/RX-V595aRDS REAR PANELS RX-V595a/HTR-5150 U model RX-V595a/HTR-5150 C model RX-V595a R model RX-V595a/HTR-5150 T model...
  • Page 5 RX-V595a/HTR-5150/RX-V595aRDS RX-V595a/HTR-5150 A model RX-V595aRDS B model RX-V595aRDS G model RX-V595a L model...
  • Page 6: Specifications

    RX-V595a/HTR-5150/RX-V595aRDS SPECIFICATIONS AUDIO SECTION RIAA Equalization Deviation PHONO (MM) 0±0.5dB Minimum RMS Output Power Per Channel Total Harmonic Distortion(20Hz to 20kHz) (Power Amp. Section) PHONO (MM) to REC OUT (1V) 0.02% U, C models CD etc.(EFFECT OFF) to MAIN SP OUT(35W/8Ω) MAIN L/R, REAR L/R 0.025%...
  • Page 7 RX-V595a/HTR-5150/RX-V595aRDS DIMENSIONS AM SECTION Tuning Range U, C models 530 to 1710kHz R, T models (Frequency Step : 10kHz) 530 to 1710kHz (Frequency Step : 9kHz) 531 to 1611kHz A, B, G, L models 531 to 1611kHz Usable Sensitivity 300µV/m...
  • Page 8: Internal View

    RX-V595a/HTR-5150/RX-V595aRDS INTERNAL VIEW POWER TRANSFORMER P.C.B. MAIN (3) P.C.B. OPERATION (7) (R, T models only) P.C.B. OPERATION (3) P.C.B. MAIN (4) P.C.B. MAIN (8) P.C.B. OPERATION (6) P.C.B. MAIN (2) P.C.B. MAIN (1) P.C.B. VIDEO P.C.B. INPUT (1) P.C.B. INPUT (3) P.C.B.
  • Page 9: Self Diagnosis Function

    SELF DIAGNOSIS FUNCTION 1. PURPOSE AND OPERATION The RX-V595a/HTR-5150/RX-V595aRDS has a Self Diagnosis Function to locate a faulty part, if any, by inspecting and taking measurements. There are 11 main items in the diagnostic menu and some of them have sub-menu items as listed below.
  • Page 10 RX-V595a/HTR-5150/RX-V595aRDS 2. BEGINNING AND CANCELLATION (1) STARTING UP THE FUNCTION AND THE DISPLAY After starting up, menu No. 1 is selected. A. How to start diagnostic program Using the front panel keys of the main unit. Plug in the AC power cord , and, with Power OFF, hold down the "INPUT MODE" and "FM/AM" keys simultaneously (Step 1), and then press the "STANDBY/ON"...
  • Page 11 RX-V595a/HTR-5150/RX-V595aRDS FL display at start-up of diagnostic program When the diagnostic program has started, the history (*2) of the protection function (*1) is displayed. If the protection function has been activated in the past, the type and voltage value are displayed. After a few seconds the diagnosis function menu will appear.
  • Page 12 RX-V595a/HTR-5150/RX-V595aRDS 3. OPERATION AND DISPLAY WHEN STARTING DIAGNOSIS FUNCTION (1) Selection of diagnostic menu The diagnostic menu and the sub-menu can be selected by using the front panel keys of the main unit or the remote control unit. Selection by using the front panel keys The main menu can be changed cyclically by using the "TUNING UP/DOWN"...
  • Page 13 RX-V595a/HTR-5150/RX-V595aRDS 4. CONTENTS OF DIAGNOSIS FUNCTION This section describes the contents of the self diagnosis function in detail. No.1 ANALOG THROUGH The input is fixed to analog (A/D). There are two submenus. 1 DVD/LD MAIN BYPAS 1. MAIN BYPASS The MAIN L/R signals bypass the analog circuits to be output.
  • Page 14 RX-V595a/HTR-5150/RX-V595aRDS No.2 DSP THROUGH The input is automatically discriminated by signal detection and switched with priorities AC-3 (DOLBY DIGITAL)>DTS Digital Surround>Audio>analog. There are the following three submenus. 2 DVD/LD YSS918SRAM 1. YSS918-SRAM MAIN L/R are input to the DSP via AC3D2av, pass through SRAM, and are then output to all channels without being processed.
  • Page 15 RX-V595a/HTR-5150/RX-V595aRDS No.3 AC-3/DTS THROUGH The input is digital signal only. AC-3 (DOLBY DIGITAL) or DTS Digital Surround decoding operation is executed, according to the input source. bit 0 bit 7 3 DVD/LD 3T00000001 1. STATUS(BINARY FORM) AC-3 (DOLBY DIGITAL) decoded signals are output to each channel via AC3D2av.
  • Page 16 RX-V595a/HTR-5150/RX-V595aRDS No.5 SPEAKERS SET The input is automatically discriminated by AC-3(DOLBY DIGITAL)>DTS Digital Surround>PCM Audio>analog. There are the following 9 submenu items: The signal from the DSP block is normally in the effect off status for menu items 1-4. For other menu items, the same signal as in 2. DSP THROUGH: YSS918 menu is output.
  • Page 17 RX-V595a/HTR-5150/RX-V595aRDS No.6 DISPLAY CHECK Check program for FL display. The display status will change as follows with submenu operation. The signal is processed with EFFECT OFF. 6 DVD/LD DISP CHECK Initial display All segments turn off All segments turn on...
  • Page 18 RX-V595a/HTR-5150/RX-V595aRDS No.9 AD DATA CHECK The A/D conversion values of the main CPU which detects key scan, protection, etc. are displayed in % (100%: 5V). All signal processing before this menu is executed will be held. The keys on the main unit cannot be operated to detect the values of all keys in the K1/K2/K3/K4 and SI.
  • Page 19 RX-V595a/HTR-5150/RX-V595aRDS No.10 STATUS FROM DSP MICOM The status data from the DSP microprocessor is sequentially displayed in a hexadecimal number. All signal processing before this menu is executed will be held. STATUS 1st 2nd 3rd 4th 10 DVD/LD 0 00000000...
  • Page 20 RX-V595a/HTR-5150/RX-V595aRDS No.11 CPU VERSION/CHECK SUM/PORT INFO/EXIT DIAG The check sum, version and port setting of main CPU/DSP CPU are displayed. The signal is EFFECT OFF. Operating the submenu will finish self-diagnosis, and ordinary operation mode will be restored. The suffix letter ("B" in the following) of version indication is for compatibility of communications between the main and DSP microprocessors.
  • Page 21: Factory Preset

    RX-V595a/HTR-5150/RX-V595aRDS FACTORY PRESET All of the system settings are iniially set from the factory as follows. INPUT (VIDEO) DVD/LD (DVD/LD) EFFECT LEVEL EFFECT CHANNEL PRESET VALUE CENTER 0 dB RIGHT SURROUND 0 dB LEFT SURROUND 0 dB SUBWOOFER 0 dB...
  • Page 22: Amp Adjustment

    RX-V595a/HTR-5150/RX-V595aRDS AMP ADJUSTMENT Confirmation of Idling Current of Main Amplifier • Right after power is turned on, confirm that the voltage across the terminals of R688(Main Lch),R690(Main Rch), R692(Center), R694(Rear Lch), R696(Rear Rch) are between 0.1mV and 5.0mV. • If it exceeds 5.0mV, open (cut off) R571 (Main Lch), R577 (Main Rch), R589 (Center), R595 (Rear Lch), R583 (Rear Rch) and reconfirm the voltage again.
  • Page 23: Tuner Adjustment

    RX-V595a/HTR-5150/RX-V595aRDS TUNER ADJUSTMENT Measuring Instruments Dummy antenna 1) FM signal generator (FM SG) FM dummy antenna 2) Stereo signal generator (SSG) 3) AM signal generator (AM SG) 10Ω 45Ω 4) Distortion meter (DIST. M) FM SG RECEIVER 5) AC Voltmeter (ACVM) (75Ω)
  • Page 24 RX-V595a/HTR-5150/RX-V595aRDS FM Adjustment 4) Set each switch to the following position unless otherwise Before Adjustment 1) For dBµ, 1µV=0dBµ applies. specified. Example : 60dBµ=1mV INPUT SELECTOR ..TUNER 2) 100% modulation means that the frequency deviation is TUNING MODE ..... AUTO ±75kHz.
  • Page 25 RX-V595a/HTR-5150/RX-V595aRDS See page 22 for TP locations & adjustment points. Reception Adjustment Step Adjustment item Signal (ANT IN) Test point Rating frequency point Adjustment of FM ANT (75Ω) 98.1MHz Front end IFT Pin 16 of IC1 Adjust so that the meter is front end IFT 98.1MHz...
  • Page 26 RX-V595a/HTR-5150/RX-V595aRDS AM Adjustment (This should be done after FM adjustment.) Connection diagram (Measuring instruments) 1) Adjustment of sensitivity. AM loop antenna AM ANT ACVM TUNER AM SG dummy P.C.B antenna DIST. M Oscilloscope See page 22 for TP locations & adjustment points.
  • Page 27: Top View

    RX-V595a/HTR-5150/RX-V595aRDS IC DATA IC800 : LC876564A-5M19 8 bit Main µ-COM S48/PG0 S19/PC3 S49/PG1 S18/PC2 S50/PG2 S17/PC1 S51/PG3 S16/PC0 VDD3 S15/T15 S14/T14 S13/T13 VSS2 S12/T12 VDD2 S11/T11 TOP VIEW S10/T10 S9/T9 S8/T8 S7/T7 P10/SO0 S6/T6 P11/SI0 S5/T5 P12/SCK0 S4/T4 P13/SO1 S3/T3...
  • Page 28 RX-V595a/HTR-5150/RX-V595aRDS IC800 : LC876564A-5M19 8 bit Main µ-COM Port Function Port Function Name Name FLA-CLK I/O Flash clock 26 P70/INT0 I Power down detect FLA-I/O I/O Flash input/output 27 P71/INT1 O Full mute (L : ON) FLA-SEL I/O Flash select...
  • Page 29 RX-V595a/HTR-5150/RX-V595aRDS IC800 : LC876564A-5M19 8 bit Main µ-COM Port Function Port Function Name Name 76 S43/PF3 POWER-RY O Power relay 52 S20/PC4 O FL Segment 5 77 S44/PF4 –10dB O –10 dB select (L : –10dB) 53 S21/PC5 O FL Segment 6...
  • Page 30 RX-V595a/HTR-5150/RX-V595aRDS IC14 : LC875164A-5K20 µ 8 bit Sub -COM PWM1 SI2P3 SCK2 P17/PWM P16/PWL VSS3 P15/SCK1 VDD3 P14/SI1 P13/SO1 TOP VIEW P12/SCK0 P11/SI0 P10/SOO P87/AN7 P86/AN6 INTERRUPT CONTROL STANDBY /RES CONTROL CLOCK GENE- RATOR Xtal SERIAL I/O 0 BUS INTERFACE...
  • Page 31 RX-V595a/HTR-5150/RX-V595aRDS IC14 : LC875164A-5K20 µ 8 bit Sub -COM Port Function Port Function Name Name I Receive data from DIR2 PWM0 OL Unconnected /ICDI O Initial clear for DIR2 VDD2 VDD2 +5V +5V power supply /KM1 O Switching DIR2 forced (analog) mode...
  • Page 32 RX-V595a/HTR-5150/RX-V595aRDS IC3 : YM3436DK (DIR2) Digital Format Interface Receiver 24 26 28 25 17 15 14 13 12 31 EXTW DOM0 SYSTEM CLOCK EXTW DOM1 TIMING DDIN DIM0 SYNC GENERATOR DIM1 DDIN TOP VIEW TST2 DATA CLOCK EIAJ (AES/EBU) CONTROLLER...
  • Page 33 RX-V595a/HTR-5150/RX-V595aRDS IC4 : YSS918D-F (AC3D2av) DSP + AC-3(Digital Dolby)/ Pro Logic/ DTS Digital Surround Decoder PVSS SDWCK0 SDWCK1 SDBCK0 SDBCK1 SDIA0 SDOB0 SDIA1 SDOB1 RAMA1 SDOB2 RAMA0 RAMA7 RAMWEN RAMA8 RAMOEN RAMA9 TOP VIEW VDD2 IPORT7 OPORT7 IPORT6 OPORT6 IPORT5...
  • Page 34 RX-V595a/HTR-5150/RX-V595aRDS IC4 : YSS918D-F (AC3D2av) DSP + AC-3(Digital Dolby)/ Pro Logic/ DTS Digital Surround Decoder Name Function VDD1 +5V power supply RAMCEN RAM chip enable output terminal (normally unconnected) RAMA16 RAM address output terminal 16, connected to external 1M SRAM address...
  • Page 35 RX-V595a/HTR-5150/RX-V595aRDS IC4 : YSS918D-F (AC3D2av) DSP + AC-3(Digital Dolby)/ Pro Logic/ DTS Digital Surround Decoder Name Function VDD2 +3V power supply NONPCM non-PCM data output terminal, non-PCM data detect CRC output terminal (normally unconnected) MUTE Mute output terminal, output data mute detect...
  • Page 36 RX-V595a/HTR-5150/RX-V595aRDS IC5 : M5M51288BKJ-20LTEL (1M SRAM) 131072-word x 8 bit High Speed Static RAM 131072-word x 8 bit MEMORY ARRAY (512-row X 2048-column) 2048 TOP VIEW COLUMN I/O COLUMN ADDRESS /CE1 DECODER COLUMN INPUT BUFFER /CE1 CHIP SELECT WRITE CONTROL...
  • Page 37 RX-V595a/HTR-5150/RX-V595aRDS IC6 : AK4526A-VQ (CODEC AD/DA) 20 bit 6 channel A/D, D/A Converter LIN+ Audio LIN– Clock Gen. RIN+ MCLK SDOS VREFL RIN– LRCK OCKS RIN+ BICK RIN– LOUT1 DAUX BICK LIN+ LRCK DEM0 LRCK LIN– ROUT1 DEM1 BICK TOP VIEW...
  • Page 38: Display Data

    RX-V595a/HTR-5150/RX-V595aRDS DISPLAY DATA V800 : 16-BT-59GK (V2421800) PATTERN AREA • PIN CONNECTION Pin No. CONNECTION Pin No. CONNECTION Pin No. NOTE 1) F1, F2 ..Filament 2) NP ....No pin CONNECTION 3) NC ....No connection 4) DL ....Datum Line 5) 1G~16G ..
  • Page 39: Block Diagram

    RX-V595a/HTR-5150/RX-V595aRDS BLOCK DIAGRAM (1/2) U,C,R,T models FM DET AM/FM IF DET. COIL CERAMIC CERAMIC LA1266 LA3401 A,B,G,L FILTER FILTER L.P.F. models Fi 1 IF AMP Fi 2 FM IF POST AMP RF AMP TUNER FM ANT FM/AM DECODER MUTING Q1,2...
  • Page 40 RX-V595a/HTR-5150/RX-V595aRDS BLOCK DIAGRAM (2/2) PHONES MAIN MAIN SELECTOR POWER AMP VR401 LEVEL IC10A IC102 IC103 Q506,511,512, IC103 IC351 IC401A IC802A 521,529,Q527A/C IC108B INPUT MAIN COAXIAL SELECTOR IC352 H,P,F Q810 Q501 DVD/LD OPTICAL IC103 TONE IC10B IC103 CONTROL TV/DBS OPTICAL RY501...
  • Page 41 RX-V595a/HTR-5150/RX-V595aRDS PRINTED CIRCUIT BOARD (Foil side) • B and G models There are two types of the Tuner P. C. B. assembly in this model: P. C. B. ASS'Y TUNER LIST P. C. B. TUNER (Lead Type & SMD) One has only lead-type devices and the other has lead-type and surface-...
  • Page 42 RX-V595a/HTR-5150/RX-V595aRDS PRINTED CIRCUIT BOARD (Foil side) • U, C, R, T, A and L models P. C. B. ASS'Y TUNER LIST There are two types of the Tuner P. C. B. assembly in this model: P. C. B. TUNER (Lead Type & SMD) Model Markets Lead Type Lead &...
  • Page 43: Printed Circuit Board

    RX-V595a/HTR-5150/RX-V595aRDS PRINTED CIRCUIT BOARD (Foil side) P. C. B. DSP P. C. B. DSP TO: INPUT (1) TO: INPUT (3) TO: INPUT (1) LC875164A-5K20 HD74HC02FP YSS918D-F YM3436DK AK4526A-VQ AK4320 Semiconductor Location Point Point Pin 13 of IC14 Ref. No. Location Ref.
  • Page 44 RX-V595a/HTR-5150/RX-V595aRDS B, G models only PRINTED CIRCUIT BOARD (Foil side) PTY SEEK P. C. B. OPERATION (1) – PROGRAM MODE START Semiconductor Location Ref. No. Location B, G D800 models only D801 EFFECT D802 MENU D803 TIME/ LEVEL D805 MODE...
  • Page 45 RX-V595a/HTR-5150/RX-V595aRDS P. C. B. OPERATION (6) PRINTED CIRCUIT BOARD (Foil side) P. C. B. OPERATION (5) • U, C, R and T models SWITCHED 100W MAX. TOTAL P. C. B. OPERATION (3) AC OUTLETS R, T models only U, C, R and T Models Semiconductor Location Ref.
  • Page 46 RX-V595a/HTR-5150/RX-V595aRDS PRINTED CIRCUIT BOARD (Foil side) P. C. B. MAIN (1) B, G models only NFRL NFRR –B A, B, G, L only SPRY PRV1 A, B, G, L only W803 W504 TO: MAIN (3) TO: OPERATION (1) W761 W815...
  • Page 47 RX-V595a/HTR-5150/RX-V595aRDS PRINTED CIRCUIT BOARD (Foil side) P. C. B. MAIN (7) P. C. B. MAIN (6) P. C. B. MAIN (3) P. C. B. MAIN (4) TO: INPUT (1) TO: MAIN (1) W761 TO: MAIN (1) OPERATION (5) W504 –B2 W751 –B4...
  • Page 48 RX-V595a/HTR-5150/RX-V595aRDS PRINTED CIRCUIT BOARD (Foil side) P. C. B. INPUT (1) Semiconductor Location Ref. No. Location D101 D102 D103 D104 TO: TUNER TO: DSP TO: DSP IC101 IC102 IC103 IC104 IC105 IC106 IC107 IC108 A, B, G, L only IC109...
  • Page 49 RX-V595a/HTR-5150/RX-V595aRDS PRINTED CIRCUIT BOARD (Foil side) P. C. B. INPUT (3) P. C. B. INPUT (4) P. C. B. VIDEO TO: INPUT (1) W102 –12 +12A LFEO INPUT (1) W101 TO: DSP +12A TO: INPUT (1) /VCR VSEL1 VSEL0 DSIG...
  • Page 50: Schematic Diagram

    RX-V595a/HTR-5150/RX-V595aRDS SCHEMATIC DIAGRAM (VIDEO) S-VIDEO SELECTOR VIDEO SELECTOR & AMP & AMP VIDEO SIGNAL DVD/LD VIDEO SIGNAL TO INPUT (1) CB101 page 62 DVD/LD TV/DBS VIDEO TO OPE (2) S VIDEO CB807 page 64 11.6 MONITOR MONITOR VIDEO PIN CONNECTION DIAGRAM OF IC301~305 : LA7956 TRANSISTORS AND IC’s.
  • Page 51 RX-V595a/HTR-5150/RX-V595aRDS SCHEMATIC DIAGRAM (INPUT) TO OPE(4) CB802 page 64 H-4 TO DSP CB6 page 65 AUDIO SIGNAL (PLAY) VOLUME TAPE/MD (REC) EXTERNAL DECODER INPUT SURROUND OUTPUT WOOFER COAXIAL DIGITAL OPTICAL SIGNAL TO OPE(1) CB800 TO DSP CB3 page 64 A-5...
  • Page 52 RX-V595a/HTR-5150/RX-V595aRDS SCHEMATIC DIAGRAM (MAIN) MAIN POWER AMP REGULATOR 29.4 12.8 43.5 13.4 43.4 43.5(30.2) OUTPUT MAIN POWERAMP 43.5(30.2) MAIN L 43.3 -0.5 MAIN MUTE -1.1 -11.6 SPEAKERS -41.7 -42.5 -0.6 -0.6 -1.1 -43.5 (-30.3) -43.5 -41.7 MAIN (-30.3) -42.3 MAIN RELAY 43.5(30.2)
  • Page 53 RX-V595a/HTR-5150/RX-V595aRDS SCHEMATIC DIAGRAM (OPERATION) IC801, 802 : NJM2068LD S VIDEO Dual OP-Amp VIDEO – – 2 3 4 5 6 • IC800: LC876564A-5M19→See page 26~28 AUDIO -22.7 -29.7 OPE(2),(3),(4) TONE CONTROL -11.7 11.8 11.8 -19 .6 -11.7 SYSTEM & DSP -8.9...
  • Page 54 RX-V595a/HTR-5150/RX-V595aRDS SCHEMATIC DIAGRAM (DSP) TO INPUT(3) CB354 page 62 N-8 AK4526A-VQ AK4526VQ DIGITAL Point Pin 13 of IC3 V : 2V/div H : 50nsec/div AC range 1 : 1probe L.P.F 3. 1 2. 4 DSP + DOLBY DIGITAL/ 2. 4 2.
  • Page 55 RX-V595a/HTR-5150/RX-V595aRDS Each voltage given here repressents that in the FM (98.1MHz STEREO) reception mode IC1 : LA1266 IC2 : LC72131 SCHEMATIC DIAGRAM (TUNER) U, C, R, T, A and L models but the one in the parentheses ( ) is that in the AM (1080kHz, MAN’L) reception mode.
  • Page 56 RX-V595a/HTR-5150/RX-V595aRDS SCHEMATIC DIAGRAM (TUNER) B, G models Each voltage given here repressents that in the FM (98.1MHz STEREO) reception mode but the one in the parentheses ( ) is that in the AM (1080kHz, MAN’L) reception mode. IC1 : LA1266...
  • Page 57: Parts List

    RX-V595a/HTR-5150/RX-V595aRDS WARNING PARTS LIST Components having special characteristics are marked and must be replaced with parts having specifications equal to those originally installed. ELECTRICAL PARTS Carbon resistors (1/6W or 1/4W) are not included in the ELECTRICAL PARTS List. For the part Nos. of the carbon resistores,refer to page 81.
  • Page 58 RX-V595a/HTR-5150/RX-V595aRDS P. C. B. DSP Schm Schm PART NO. Description PART NO. Description UR818330 C.EL 330uF 6.3V V4035900 P.C.B. UB245100 C.CE.M.CHP 0.1uF VQ044200 CN.BS.PIN VQ044500 CN.BS.PIN UR818330 C.EL 330uF 6.3V VQ044600 CN.BS.PIN UB245100 C.CE.M.CHP 0.1uF UB245100 C.CE.M.CHP 0.1uF UB245100 C.CE.M.CHP 0.1uF UR818330 C.EL...
  • Page 59 RX-V595a/HTR-5150/RX-V595aRDS P. C. B. DSP & P. C. B. MAIN Schm Schm PART NO. Description PART NO. Description C122 UA952100 C.MYLAR 100pF IC14 XV260E00 IC LC875164A-5K20 CPU C123 UR837220 C.EL 22uF IC15 XU965A00 IC uPC29M33T-E1 3.3V C124 UR847100 C.EL 10uF VV655300 TR.DGT...
  • Page 60 RX-V595a/HTR-5150/RX-V595aRDS P. C. B. MAIN Schm Schm PART NO. Description PART NO. Description C503 UR847100 C.EL 10uF C551 VR325000 C.MYLAR 100pF 100V C504 UR847100 C.EL 10uF C552 VR325000 C.MYLAR 100pF 100V C505 UR847100 C.EL 10uF C553 UR867470 C.EL 47uF C506 UR847100 C.EL...
  • Page 61 RX-V595a/HTR-5150/RX-V595aRDS P. C. B. MAIN Schm Schm PART NO. Description PART NO. Description C753 VS745400 C.POL.MTL 0.1uF 100V Q515 VP883000 TR 2SA893A D,E C754 VS745400 C.POL.MTL 0.1uF 100V Q516 VR325600 TR 2SC2229 O,Y C761 UR868100 C.EL 100uF Q517 VP883000 TR...
  • Page 62 RX-V595a/HTR-5150/RX-V595aRDS P. C. B. MAIN & P. C. B. VIDEO Schm Schm PART NO. Description PART NO. Description R572 HV756100 R.CAR.FP 1KΩ 1/4W R692 VU981700 R.MTL.PLAT 0.22Ω+0.22Ω 3W R573 VP941500 R.MTL.OXD 4.7KΩ R694 VU981700 R.MTL.PLAT 0.22Ω+0.22Ω 3W R574 VP941500 R.MTL.OXD 4.7KΩ...
  • Page 63 RX-V595a/HTR-5150/RX-V595aRDS P. C. B. VIDEO & P. C. B. INPUT Schm Schm PART NO. Description PART NO. Description C325 UR837470 C.EL 47uF C114 FG651470 C.CE 47pF C326 UR837470 C.EL 47uF C115 FG651470 C.CE 47pF C327 UR837470 C.EL 47uF C116 UA952100 C.MYLAR...
  • Page 64 RX-V595a/HTR-5150/RX-V595aRDS P. C. B. INPUT Schm Schm PART NO. Description PART NO. Description C168 UR847100 C.EL 10uF C369 UR828100 C.EL 100uF C169 UA952100 C.MYLAR 100pF C401 UR866220 C.EL 2.2uF C170 UR837470 C.EL 47uF C402 VK533900 C.PP 100pF 200V C171 UR837470 C.EL...
  • Page 65 RX-V595a/HTR-5150/RX-V595aRDS P. C. B. INPUT & P. C. B. OPERATION Schm Schm PART NO. Description PART NO. Description IC110 XR040A00 IC TC9299P CB811 VP206500 HOLDER.FUS EYF-52BC(GL) IC111 XR040A00 IC TC9299P CB812 VG879900 CN.BS.PIN IC112 XB247A00 IC uPC4570HA CB813 VP206500 HOLDER.FUS EYF-52BC...
  • Page 66 RX-V595a/HTR-5150/RX-V595aRDS P. C. B. OPERATION Schm Schm PART NO. Description PART NO. Description C839 UA954330 C.MYLAR 0.033uF R881 VP939800 R.MTL.OXD 10Ω C840 UA954330 C.MYLAR 0.033uF R904 HV756560 R.CAR.FP 5.6KΩ 1/4W(RT) C841 UR847100 C.EL 10uF R906 HV756560 R.CAR.FP 5.6KΩ 1/4W(RT) C842 UA954100 C.MYLAR...
  • Page 67 RX-V595a/HTR-5150/RX-V595aRDS P. C. B. TUNER (Lead Type) Schm Schm PART NO. Description PART NO. Description V2518600 P.C.B. TUNER/TU-01(UC) UA952120 C.MYLAR 120pF 50V(ABGL) V2518700 P.C.B. TUNER/TU-01(RT) UA953220 C.MYLAR 2200pF 50V(UCRT) V2518800 P.C.B. TUNER/TU-01(ABGL) VJ599000 C.CE.TUBLR 0.047uF V2518900 P.C.B. TUNER/TU-01RDS(BG) UR837470 C.EL...
  • Page 68 RX-V595a/HTR-5150/RX-V595aRDS P. C. B. TUNER (Lead Type & SMD) Schm Schm PART NO. Description PART NO. Description V2519300 P.C.B. CHP TUNER/TU-01(UC) UA952120 C.MYLAR 120pF 50V(ABGL) V2519400 P.C.B. CHP TUNER/TU-01(RT) UA953220 C.MYLAR 2200pF 50V(UCRT) UB044470 C.CE.M.CHP 0.047uF V2519500 P.C.B. CHP TUNER/TU-01(ABGL) UR837470 C.EL...
  • Page 69: Parts List

    RX-V595a/HTR-5150/RX-V595aRDS Parts List for Carbon Resistors Chip Resistors Schm PART NO. Description Value 1/4W Type Part No. 1/6W Type Part No. Value 1/4W Type Part No. 1/6W Type Part No. RD250000 R.CAR.CHP 0Ω 1/10W 1.0 Ω 3100 3100 10 kΩ...
  • Page 70: Exploded View

    RX-V595a/HTR-5150/RX-V595aRDS EXPLODED VIEW MECHANICAL PARTS Ref. PART NO. Description Remarks Markets 1- 1 V3826300 FRONT PANEL RX-V595a BL 1- 1 V3826400 FRONT PANEL RX-V595a GD 1- 1 V3826500 FRONT PANEL RX-V595aRDS BL 1- 1 V3826600 FRONT PANEL RX-V595aRDS TI 1- 1...
  • Page 71 HTR-5150 V3830100 REAR PANEL HTR-5150 V3830200 REAR PANEL HTR-5150 V2460800 FRAME, TRANSFORMER V2461100 SHIELD CASE VZ332800 SHIELD CASE COVER V2460900 FRAME V0042500 LEG D60xH21 RX-V595a GD V0042500 LEG D60xH21 HTR-5150 VS025000 LEG D60xH21 RX-V595a BL/TI VV544300 LEG D60xH21 HTR-5150 (UCA)
  • Page 72: Remote Control Transmitter

    RX-V595a/HTR-5150/RX-V595aRDS Ref. PART NO. Description Remarks Markets V2467500 BUTTON V2469400 SHEET, WINDOW V3153900 SHHET (RABGLT) V2468800 PLATE SIDE L V2468900 PLATE SIDE L V2468900 PLATE SIDE L V2469100 PLATE SIDE R V2469200 PLATE SIDE R V2469300 PLATE SIDE R VR264400 SPACER...
  • Page 73: Remote Control Transmitter

    RX-V595a/HTR-5150/RX-V595aRDS REMOTE CONTROL TRANSMITTER SCHEMATIC DIAGRAM (RAV174 or RAV175) • U, C, R, T and L models → RAV174 • A, B and G models → RAV175 K10 K20 K30 ROTARY SW Key arrangement K19 K29 MODE 9:AMP/TUNER K18 K28...
  • Page 74 RX-V595a/HTR-5150/RX-V595aRDS...

This manual is also suitable for:

Htr-5150Rx-v595ards

Table of Contents