Setting The Sleep Timer - Yamaha RX-V595A Owner's Manual

The SLEEP timer can be used to make this unit automatically switch to the standby mode. When you are going to sleep while
enjoying a broadcast or other desired input source, this timer function is useful. The SLEEP timer can only be controlled with the
remote control.
Notes
• To set the SLEEP timer for this unit, set the SELECTOR DIAL to a position other than the TV position. To set the SLEEP timer for
your TV, set the SELECTOR DIAL to the TV position.
• The components for which the SLEEP timer is effective are the sources connected to the AC OUTLET(S) on the rear panel of
this unit.
To set the SLEEP time
1
Play the source which you want to enjoy when you are
going to sleep and press SLEEP once or more to select
the desired SLEEP time.
Remote control
The SLEEP time is displayed.
Each time you press SLEEP, the SLEEP time will change as
follows:
120
The SLEEP timer is off (SLEEP OFF).
(This is the state before SLEEP is
pressed.)
The "SLEEP" indicator soon lights up and the display returns
to the indication before the SLEEP timer was set.
2
The unit will be switched to the standby mode automati-
cally at the selected SLEEP time.
01RX-V595a-e/f3

SETTING THE SLEEP TIMER

1
Flashes
(Minutes)
90 60 30
35
To cancel the selected SLEEP time
Remote control
Press SLEEP once or more so that "SLEEP OFF" appears on
the display. (It will soon disappear and the "SLEEP" indicator
will go off from the display.)
Note
The SLEEP timer setting can also be canceled by setting the
unit in the standby mode with STANDBY/ON on the front panel
(or STANDBY on the remote control) or by disconnecting the
power plug of the unit from the AC outlet.
6/24/99, 11:44 AM
35