Clearing Function Sets; Clearing Individual Functions - Yamaha RX-V1400 Owner's Manual

Clearing function sets

You can clear all changes made in each function set, such
as learned functions, renamed source names and setup
manufacturer codes.
1
Press CLEAR by using a ballpoint pen or
similar object.
CLEAR
y
Complete each of the following steps in 30 seconds. Other
wise, the learning mode will be automatically canceled. In
this case, press CLEAR again.
2
Press u / d to select the clear mode.
L:DVD
(L: name of a component)
Clears all learned functions in the respective
component control area. Press an input selector
button to select the component.
L:AMP
Clears all learned functions for this unit's control
area.
L:ALL
Clears all learned functions.
RNAME
Clears all renamed source names.
FCTRY
Clears all remote functions and returns the remote
to the factory settings.
3
Press and hold CLEAR again for about 3
seconds.
"C:OK" appears in the display window.
CLEAR
Note
"C:NG" appears in the display window if the operation is
unsuccessful. In this case, start over from step 2.
4
Press CLEAR to exit from the clearing mode.
Once you have cleared a learned function for a
button, the button reverts to the factory setting.
CLEAR
Note
"ERROR" appears in the display window under the following
circumstances:
– When a button other than the cursor is pressed.
– When more than one button is pressed at once.

Clearing individual functions

Clearing a learned function
You can clear the function learned in a certain
programmed button in each area.
1
Press an input selector button to select the
source component containing the function
you want to clear.
The selected component name appears in the display
window.
PHONO TUNER CD MULTI CH IN
V-AUX
CBL/SAT MD/TAPE CD-R
DTV VCR 1 DVR/VCR2 DVD
2
Press LEARN using a ballpoint pen or similar
object.
"LEARN" and the selected component name appear
alternately in the display window.
LEARN
y
Complete each of the following steps in 30 seconds.
Otherwise the learning mode will be automatically canceled.
In this case, press LEARN again.
3
Press and hold CLEAR using a ballpoint pen
or similar object, then press the button you
want to clear for about 3 seconds.
"C:OK" appears in the display window.
TRANSMIT RE–NAME
CLEAR LEARN
SYSTEM
POWER STANDBY SLEEP INPUT MODE
PHONO TUNER CD MULTI CH IN
V-AUX CBL/SAT MD/TAPE CD-R
DTV VCR 1 DVR/VCR2 DVD
When you clear a learned function, the button reverts
to the factory setting (or to the manufacturer setting if
you have set manufacturer codes).
4
Repeat step 3 to clear other learned
functions.
5
Press LEARN again to exit.
REMOTE CONTROL FEATURES
63