Yamaha RX-V1400 Owner's Manual page 61

Yamaha av receiver owner's manual
Hide thumbs Also See for RX-V1400:
Table of Contents

Advertisement

Parameter initialization
Use this feature to initialize the parameters for each sound
program within a sound
field
you initialize a sound
program group, all of the
field
parameter values within that group revert to their initial
settings.
MANUAL SETUP > OPTION MENU > PARAM. INI >
Press the corresponding numeric button for the sound
program that you want to initialize.
An asterisk (*) next to a program number means that the
parameter values have been changed from their initial
settings.
C)PARAM. INI
1
*5
9 *10
Notes
• You cannot automatically revert to the previous parameter
settings once you initialize a
• You cannot separately initialize individual
programs.
• You cannot initialize any program groups when MEMORY
GUARD is set to ON.
Speaker impedance setting
Use to select the impedance of your speakers.
MANUAL SETUP > OPTION MENU > SP IMP.SET >
D)SP IMP.SET
Minimum 8ohms
/
: Exit
-/+ : Select
Choices: 6ohms, 8ohms
PARAM. INI
program group. When
field
field
2
3
*4
6
7
8
11
sound
field program group.
sound
field
SP IMP.SET
Zone set
ZONE SET
Use to specify the location of speakers connected the
SPEAKERS B terminals.
MANUAL SETUP > OPTION MENU > ZONE SET >
D)ZONE SET
SP_B;;;;;;FRONT
/
: Exit
-/+ : Select
SP B
Use this feature to select the location of the front speakers
connected to the SPEAKERS B terminals.
Choices: FRONT, ZONE B
• Select FRONT to turn on/off SPEAKERS A and B
when the speakers connected to the SPEAKERS B
terminals are set in the main room.
• Select ZONE B if the speakers connected to the
SPEAKERS B terminals are set in another room. If
SPEAKERS A is turned OFF and SPEAKERS B is
turned ON, all the speakers including the subwoofer in
the main room are muted and the unit outputs sound
from SPEAKERS B only.
Notes
• If you connect headphones to the PHONES jack on the unit, the
sound is output from both headphones and SPEAKERS B.
• When a DSP program is selected, the unit automatically enters
the Virtual Cinema DSP mode.
SET MENU
57

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents