Advanced Operation; Set Menu; Adjusting The Items On The Set Menu - Yamaha HTR-5460 Owner's Manual

ADVANCED OPERATION

The SET MENU consists of 10 items including the
speaker mode setting features. Use the SET MENU to
enjoy the optimum audio/video playback for your system.
y
• You can adjust the items on the SET MENU while playing a
source.
• We recommend that you adjust the items on the SET MENU
while using a video monitor. It is easier to see the video
monitor than it is to see the front panel display on this unit
while adjusting the items.
Note
• The indication on the front panel display is the abbreviation of
the OSD.
1 SPEAKER SET
1A CENTER SP
1B MAIN SP
1C REAR L/R SP
1D LFE/BASS OUT
1E MAIN LEVEL
2 L/R BALANCE
3 HP TONE CTRL
4 I/O ASSIGNMENT
4A CMPNT-V INPUT
4B OPTICAL OUT
4C OPTICAL IN
4D COAXIAL IN
5 INPUT MODE
6 DOLBY D. SET
LFE LEVEL
D-RANGE
7 DTS SET
8 SP DELAY TIME
9 DISPLAY SET
BLUE BACK
OSD SHIFT
DIMMER
10 MEMORY GUARD

SET MENU

Adjusting the Items on the SET
MENU
Adjustment should be made with the remote control.
1
Note
• Some items require extra steps to change to the desired setting.
1
Set the selector dial to the
AMP/TUN (or DSP/TUN)
position.
2
Press SET MENU to enter the SET MENU.
3
Press u/d repeatedly to select the item (1 to
10) you want to adjust.
y
• By pressing SET MENU repeatedly, you can select items in the
same order as when pressing d.
4
Press j or i once to enter the setup mode of
the selected item.
The last setting you adjusted appears on the video
monitor or on the front panel display.
A/B/C/D/E
3,6
4,5
2
A/B/C/D/E
SET MENU 1/3
1 SPEAKER SET
2 L/R BALANCE
3 HP TONE CTRL
4 I/O ASSIGNMENT
/ : Up/Down
–/+ : Enter
SET MENU 1/3
1 SPEAKER SET
2 L/R BALANCE
3 HP TONE CTRL
4 I/O ASSIGNMENT
/ : Up/Down
–/+ : Enter
4A CMPNT-V INPUT
[A] • • • • • DVD
[B] • • • • • D-TV/CBL
35