Presetting Stations - Yamaha HTR-5460 Owner's Manual

Presetting Stations

Automatically presetting stations
(for FM stations)
You can use the automatic preset tuning feature to store
FM stations. This function enables the unit to
automatically tune in to FM stations with strong signals,
and to store up to 40 (8 stations x 5 groups) of those
stations in order. This feature enables you to easily tune in
to any preset station by selecting the preset station
number (see "Tuning in to a Preset Station").
D I G I T A L
SURROUND
STANDBY
/ON
BASS BASS TREBLE SPEAKERS
EXTENSION DSP
A B
EFFECT PROGRAM
+ +
ON OFF – – ON OFF
PHONES S VIDEO
SILENT
1
Press FM/AM to select the FM band.
FM/AM
2
Press TUNING MODE (AUTO/MAN'L MONO)
so that the "AUTO" indicator lights up on the
front panel display.
TUNING
MODE
AUTO/MAN'L MONO
3
Press and hold MEMORY (MAN'L/AUTO FM)
for more than 3 seconds.
The preset number, the "MEMORY" and "AUTO"
indicators flash. Then, after about 5 seconds,
automatic preset tuning begins from the frequency
currently displayed toward the higher frequencies.
MEMORY
MAN'L/AUTO FM
V-AUX VCR2/DVR VCR 1 D-TV/CBL
When automatic preset tuning is completed, the front
panel display shows the frequency of the last preset
station.
VOLUME
D I G I T A L
INPUT MODE 6CH INPUT
INPUT
PRESET TUNING
/TUNING FM/AM MEMORY MODE
EDIT MAN'L/AUTO FM AUTO/MAN'L MONO
VIDEO L AUDIO R OPTICAL
VIDEO AUX
1 3 2
AUTO
Lights up
DVD MD/CD-R TUNER
AUTO MEMORY
VOLUME
Notes
• Any stored station data existing under a preset number is
cleared when you store a new station under that preset number.
• The reception mode is stored along with the station frequency.
• You can manually replace a preset station with another FM or
AM station by simply following the procedure in the section
"Manually presetting stations".
• If the number of the received stations does not reach E8,
automatic preset tuning has automatically stopped after
searching all stations.
• Only FM stations with sufficient signal strength are stored
automatically by automatic preset tuning. If the station you
want to store is weak in signal strength, tune in to it manually
in the monaural mode, and store it by following the procedure
in "Manually presetting stations".
Automatic preset tuning options
You can select the preset number from which the unit will
store FM stations and/or begin tuning toward lower
frequencies. Before automatic preset tuning begins (after
pressing MEMORY in step 3):
1. Turn the multi jog knob to select the preset number
under which the first station will be stored. Automatic
preset tuning will stop when stations have all been
stored up to E8.
2. Press PRESET/TUNING (EDIT) to turn off " z " and
then turn the multi jog knob to the left to begin tuning
toward lower frequencies.
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is set in the standby
mode, the power cord is disconnected from the AC
outlet, or the power supply is temporarily cut due to
power failure. However, if the power is cut for more
than one week, the preset stations may be cleared. If
so, store the stations again by using the presetting
station methods.
TUNING
31