Yamaha RX-V461 Owner's Manual page 60

SET MENU
■ Input rename
B)INPUT RENAME
Use this feature to change the name of the input source
that appears in the OSD and in the front panel display.
2 INPUT MENU
B)INPUT RENAME
DVD ->
p
[ ]/[ ]:Position
[ ]/[ ]:Chara.
1
Press one of the input selector buttons ( A )
to select the input source you want to
change the name of.
MD
CD CD-R
CBL
DVD DTV
DOCK
V-AUX DVR
Set the operation mode selector (K) to AMP
2
and then press D l / h on the remote
control to place the "_" (underscore) under
the space or the character you want to edit.
3
Press D k / n to select the character you
want to use and then press D l / h to move
to the next space.
Notes
• You can use up to 8 characters for each input.
• Press D n to change the character in the following order,
or press D k to go in the reverse order:
A to Z, a space, 0 to 9, a space, a to z, a space, symbols (#,
*, –, +, etc.)
4
Repeat steps 1 through 3 to rename each
input source.
Press D ENTER to exit from "INPUT
5
RENAME".
56
En
DVD
[
MULTI CH IN
TUNER XM
■ Volume trim
C)VOLUME TRIM
Use this feature to adjust the output volume of each
source. This is useful if you want to balance the level of
each input source to avoid sudden changes in volume
when switching between input sources.
Choices: CD, MD/CD-R, TUNER, DVD,
DTV/CBL, V-AUX, DVR, DOCK,
MULTI CH IN, XM
Control range: –6.0 to +6.0 dB
Control step: 1.0 dB
Initial setting: 0.0 dB
2 INPUT MENU
C)VOLUME TRIM
DVD
DVD ;;;;;;0.0dB
p
[ ]/[ ]:Adjust
[RETURN]:Exit
Note
You can only adjust the value for DOCK when your iPod is
stationed in the Yamaha Universal Dock connected to this unit.
■ Decoder mode
2 INPUT MENU
D)DECODER MODE
.
>AUTO
CD
DVD
DTV/CBL ;;;;AUTO
[ ]/[ ]:Up/Down
p
[ ]/[ ]:Select
Decoder select mode
Use this feature to designate the default decoder mode for
the input sources connected to the DIGITAL INPUT jacks
when you turn on the power of this unit.
Choices: AUTO, LAST
• Select "AUTO" if you want this unit to automatically
detect the type of input signals and select the
appropriate decoder mode.
• Select "LAST" if you want this unit to automatically
select the last decoder mode used the connected input
source.
DTS decoder prioritize setting
Choices: AUTO, DTS
• Select "AUTO" if you want this unit to automatically
detect input signal types and select the appropriate
input mode.
• Select "DTS" when you play back a DTS-CD.
[
D)DECODER MODE
LAST
;;;;AUTO
;;;;AUTO
[