Surge Suppressor Terminal Connections - Chamberlain Elite CSW-200-UL Owner's Manual

Master/Second
Connection
S U R G E S U P P R E S S O R T E R M I N A L C O N N E C T I O N S
120 Vac
Power
Page 18
OR
Second Operator Link
Separate Power
External 120 Vac "Safety" Loop Detector
Separate Power
External 120 Vac "Exit" Loop Detector
24 VDC Photo Electric Sensors (Safety)
NOTE: Terminals 11 and 12 are the
Open and Close with a single push of a button. All other
terminals will ONLY Open with a single push of a button.
Page 23
Page 23
Power
Page 25
ONLY terminals that will
Output Power
To ENSURE proper operation of external devices:
• ENSURE bare wires make good contact inside
removable terminal connections.
• DO NOT let wire insulation interfere with connection.
Remote NOT Included
Programming the remote control
on pages 28 and 29.
315 MHz Factory Installed Radio Receiver
Separate power
for card reader.
Telephone Entry System
Separate power
Fire or any Key Switch
15
Ground
24 VDC
Removable
Terminals
CAUTION
Card Reader
Push Button
Dry Contact
for TES.
Dry Contact