LG Y4NV15ANLK0 Data Book page 77

6RWU0-06A
3.1Power cord
How to connect power supply cord
Remove the front gille by pulling it out at the bottom
1
to release it, then lift it up along the unit top front.
2 Remove cover by removing 2 screws from front.
Connect accessory power supply cord, and attach
3
power cord to base pan with screws.
* You need to attach ground wire to cover with a ground
screw.
(CONFIGURATION BASED ON POWER CORD)
POTWER CORD VOLTAGE
AYUH2315 230/208 V
AYUH2320 230/208 V
AYUH2330 230/208 V
Accessories
ELECTRIC HEATER RATING
HEATER HEATER
WATTS CURRENT
2 000/1 650 W 9.2/8.4 A
3 000/2 450 W 13.5/12.3 A
5 000/4 000 W 22.1/20.2 A
4 Replace cover with screws.
Tighten securely.
5 Slide the unit into the wall sleeve and secure with 4
screws through the unit flange holes.
6 Reinstall the front grille by hooking the top over the
unit top, then pushing it in at the bottom.
MAX. MIN. CIRCUIT
FUSE SIZE AMPACITY
15 A 11.9 A
20 A 17.2 A
30 A 28.0 A
PTAC
Power cord accessories
77