LG Y4NV15ANLK0 Data Book page 37

YA Chassis
MODE 1: Control Type
Press MODE until a 1 appears in the first digit of the display for Control type
mode.
Remote mode allows the unit to operate by the Remote Wall Thermostat.
The unit control by buttons are not available.
Press the ∧ pad to select Remote.
The default setting for Mode 1 is Local, Wifi and LG Exclusive Wired Remote
Controller.
MODE 2: Energy Saver
Press MODE until a 2 appears in the first digit of the display for Energy
Saver mode. Energy Saver mode is set at cycle fan to provide continuous
fan operation in cool or heat modes.
When Energy Saver mode is off, the continuous fan allows continuous
circulation of room air and make the more balanced temperature of the
room. When Energy Saver mode is on, the fan is on or off with the
compressor or with the heater.
Press the ∧ pad to turn on Energy Saver mode.
The default setting for Mode 2 is off
MODE 3: Temperature Display
Press MODE until a 3 appears in the first digit of the display for Temperature
Display mode. Press the ∧ pad to select Celsius.
The individual will see an F for Fahrenheit or a C for Celsius.
The default setting for Mode 3 is Fahrenheit.
37
Wired Remote Controller
PTAC
6RWU0-06A
Local/Wifi/LG Exclusive
Remote
Off
On
Fahrenheit
Celsius
Product Data