1-2: Initialize - Yamaha TG500 Owner's Manual

[PLAY/MODE] -> VCE PLAY -> [EDIT/COMPARE] -> 1: Key Parameter -> [ENTER] -> [PAGE]
-> 1-2: Initialize -> [ENTER]
editing an existing key, use this function to initialize all data for the specified
drum key.
DRM Key Initialize
(Clave ) Key= C
TG500 to enter the drum key you want to initialize (C1 ... C5), then press
[ENTER] to begin the initialize procedure. The following confirmation display
will appear:
DRM Key Initialize Sure?
(Clave ) Key= C 1
operation (which will erase all current edited data), or press [-1/NO] to cancel.
has been initialized.
D R U M

1-2: INITIALIZE

When you want to program a single drum key "from scratch," rather than
Use the [-1/NO] and [+1/YES] keys or the keyboard connected to the
Press [+1/YES] to confirm that you want to go ahead with the initialize
"Completed!" will appear briefly on the display when the drum key data
See page 285 through 292 for initial drum voice chart.
V O I C E E D I T
1
1 - 2 : I N I T I A L I Z E
M O D E / 1 : K
171