[PLAY MODE] -> VCE PLAY -> [EDIT/COMPARE] -> 3: Full Edit -> [ENTER] -> 3-7: Effect -> [ENTER]
This function facilitates voice effect editing by allowing the effect parameters
from any other voice, performance combination, or multi setup to be copied to the
current voice. You can copy an effect setup that is close to the type you want, then
edit it to produce the required sound.
Move the cursor to the left parameter (press the [
[+1/YES] keys to select the mode containing the desired voice and effect data
("PFM" = PERFORMANCE, "VCE" = VOICE, and "MLT" = MULTI). Move the
cursor to the right parameter (press the [
nation is selected as the source, use the [MEMORY] key to select the memory area
from which the source voice or performance combination is to be selected. Use the [-
1/NO] and [+1/YES] keys to select the source voice or performance number. The [-1/
NO] and [+1/YES] keys can be used to select the source multi number
(0 ... 15) when "MLT" is selected.
Once the source voice, performance combination, or multi setup has been selected,
press the [ENTER] key. "Sure?" will appear on the display.
Press the [+1/YES] key to copy the effect data, or press [-1/NO] to cancel the
copy operation. Once the copy operation has finished, "Completed!" will appear on
the display briefly, then the display will return to the effect edit mode.
VOICE EDIT MODE / 3: Full Edit. 3-7: Effect
EFFECT DATA COPY
VCE EF Copy from?
M
PF
´01:AP Piano
VCE EF Copy Sure?
PFM ´01:AP Piano
,
] key) and use the [-1/NO] and
.
] key) and, if a voice or performance combi-
EFFECT DATA COPY
161