Naming A Pad - Yamaha AW4416 Operation Manual

Naming a pad

You can name each pad to which a sample is assigned.
1. In the SAMPLING PAD section, press the [EDIT] pad
The PAD Edit page will appear.
2. Move the cursor to the NAME menu and press the [ENTER] key.
The display will show the PAD button used to select a pad, and the NAME button
used to assign a name.
3. Move the cursor to the PAD button and press the [ENTER] key.
The cursor will move to the PAD No. area at the lower right.
4. Use the [CURSOR] keys and the [DATA/JOG] dial to select the bank and
number of the pad that you wish to name.
5. Press the [ENTER] key.
The cursor will return to the PAD button.
NAME button
Chapter12—Sampling pads
[F4] key.
193
— Operation Guide