Adjusting The Location Of A Locate Point - Yamaha AW4416 Operation Manual

Adjusting the location of a locate
point
The location of the Start/End points, A/B points, In/Out points, and Markers can
be adjusted as desired.
1. Press the [TRACK] key
A screen will appear in which you can adjust the various locate points.
• Except for the Start/End points, the displayed location of the locate points will
differ depending on the currently selected counter display type (Time, Time
Code, Measure). The Start point and End point are always displayed as time
code, regardless of the currently selected display method.
• The automix of the AW4416 operates according to the absolute time of the
song. Be aware that if you change the start point after recording events in the
automix, the song will no longer be synchronized with the automix.
2. Use the CURSOR [
the [DATA/JOG] dial to adjust the location of each locate point.
When you change the Start point, the absolute time zero of the song will change.
For example if you change the Start point to "00:00:05:00.00," the location five
seconds after the beginning of the song will be specified as absolute time zero. (If
you press the [RTZ] key when absolute time is displayed, you will move to this
point.)
• The smallest unit of adjustment will be a "millisecond" if time (SECOND) is
selected as the counter display method, "sub-frame" if time code display (TIME
CODE) is selected, or "beats" if measure display (MEASURE) is selected.
• When adjusting the location of a marker, it is not possible to move the marker
beyond the preceding or following marker.
[F4] key.
A point
In point
Start Point
Marker number
]/[ ]/[ ]/[ ] keys to move the cursor, and use
Chapter6—Transport/locate operations
Out point
End point
— Operation Guide
B point
123