Yamaha AW4416 Operation Manual page 84

Chapter4—Connections and setup
Using a digital MTR as the word clock master (1)
This method uses a digital MTR as the word clock master, and causes the
AW4416 to synchronize to the word clock included in the input signal from the
digital I/O card. For this method, turn on one of the 1/2–7/8 buttons for the slot to
which that digital MTR is connected.
AW4416
(word clock slave)
WORD CLOCK SOURCE= SLOT 1 1/2–7/8
• Set the digital MTR so that it will operate according to its own internal clock.
• If you are using two digital MTR units, connect the Sync Out jack of the first
to the Sync In jack of the second as shown here, so that the second digital
MTR will follow the first.
Using a digital MTR as the word clock master (2)
This method uses a digital MTR as the word clock master, and causes the
AW4416 to synchronize to the word clock supplied from the word clock output
jack of the digital MTR to the WORD CLOCK IN jack of the AW4416. For this
method, turn on the WCLK IN button.
Word Clock In
AW4416
(word clock slave)
WORD CLOCK SOURCE= WCLK IN
• Set the digital MTR so that it will operate according to its own internal clock.
• If you are using two digital MTR units, connect the Sync Out jack of the first
to the Sync In jack of the second as shown here, so that the second digital
MTR will follow the first.
70
— Operation Guide
PROFESSIONAL AUDIO WORKSTATION
OPTION
SLOT 1
OPTION
SLOT 2
Word clock
PROFESSIONAL AUDIO WORKSTATION
OPTION
SLOT 1
OPTION
SLOT 2
Word clock Digital MTR
(word clock master)
Digital MTR
(word clock slave)
Word Clock Out
Digital MTR
(word clock master)
Digital MTR
(word clock slave)
Sync Out
Word
clock
Sync In
Sync Out
Word
clock
Sync In