Volume, Dsp Depth, & Pan Settings; Individual Sample Pad Volume Settings - Yamaha PortaTone PSR-1700 Owner's Manual

Volume, DSP Depth, & Pan Settings
The VOICE section [VOL], [DSP DEPTH], and [PAN] buttons can be used to set the overall volume, DSP
depth, and pan position of all four SAMPLE PADS.
Z
Hold [EDIT] and Press [VOICE #] ..........................................................................................................
ORCHESTRATION
L1 R1
EDIT
L 2 R 2
X
Select & Set the Parameters ..................................................................................................................
VOL DSP
DEPTH
C
Exit ...........................................................................................................................................................

Individual SAMPLE PAD Volume Settings

It is also possible to individually adjust the volume of each pad as follows:
Z
Hold [EDIT] and Select a Pad ................................................................................................................
ORCHESTRATION
L1 R1
EDIT
L 2 R 2
X
Set the Volume .......................................................................................................................................
– +
0
RESET
C
Exit ...........................................................................................................................................................
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
While holding the ORCHESTRATION [EDIT] button press the DIG-
VOICE #
ITAL SAMPLING section [VOICE #] button. All four SAMPLE PAD indi-
cators will flash and the volume parameter will appear on the LCD display
panel.
08:Showtune 001:Sampl001
AccOff
Use the [VOL], [DSP DEPTH], and [PAN] buttons to select the param-
PAN
eter you want to adjust, then use the [+] and [–] buttons, the number but-
tons, the data dial, or the selected function button itself to set the parameter
as required (see page 14 for details on the volume parameter, page 15 for
the DSP depth, and page 15 for pan).
Press any other function button to exit from the parameter adjustment
mode.
While holding the ORCHESTRATION [EDIT] button press the SAM-
PLE PAD containing the sample you want to adjust. The selected SAMPLE
2
PAD indicator will flash and its current volume value will appear on the
LCD display panel.
08:Showtune 001:Sampl001
AccOff
Use the [+] and [–] buttons, the number buttons, or the data dial to set
the volume as required ("0" for no sound through "24" for maximum vol-
1 2
ume).
Press any other function button to exit from the individual pad volume
adjustment mode.
NOTES
Volume=2 – 1
Volume=2 – 1
• The individual volume setting also apply when the sampled voices are
played via the keyboard.
69