Basic Procedure In Function Mode - Yamaha YDP-223 Owner's Manual

Basic Procedure in Function Mode

Follow the steps below to use the functions.
(If you become lost while using a function, return to this page and read the basic procedure.)
1 5
MIN MAX
TEMPO
MASTER VOLUME
START/STOP FUNCTION
MELLOW BRIGHT
BRILLIANCE DEMO METRONOME TEMPO / FUNCTION
Procedure
1.
Engage Function mode.
Press the
[TEMPO/FUNCTION#]
lights.
will appear on the display. (The indication of "
the status of the unit and usage.)
2.
Select a function.
[TEMPO/FUNCTION# ▼, ▲]
Use the
from F1–F8.
TEMPO
FUNCTION
TEMPO / FUNCTION
3.
Use the [–/NO] [+/YES] buttons.
If the function does not include sub-modes, start setting the parameters.
If the function includes sub-modes, press the
respective sub-mode.
4.
Operate the desired function using the following
two buttons.
[TEMPO/FUNCTION# ▼, ▲]
1
Selects the desired function/sub-mode.
2 [–/NO] or
[+/YES]
After you select the desired function or sub-mode, set the ON/OFF, select
the type, or change the value, accordingly.
Depending on the setting, the default setting (which is used when you
first turn on the power to the YDP-223) is recalled by pressing the
and buttons simultaneously.
[+/YES]
2 4 3 4
TEMPO/ OTHER VALUE
– /NO +/ YES PRESET
button so that its
buttons to select the desired function
[+/YES]
GRAND GRAND E.PIANO E.PIANO
PIANO 1 PIANO 2 1 2
CHURCH CHURCH JAZZ STRINGS
TRACK TRACK START/STOP REC
ORGAN1 ORGAN2 ORGAN 1
1 2
VOICE
SONG
indicator
[FUNCTION#]
" varies depending on
button once to enter the
[–/NO]
YDP-223
HARPSI- HARPSI- VIBRA-
CHORD1 CHORD2 PHONE
ROOM CHORUS
HALL 1 PHASER HARD
HALL 2 TREMOLO MEDIUM
STRINGS
2 CHOIR GUITAR STAGE DELAY SOFT ON
REVERB EFFECT TOUCH TRANSPOSE
NOTE
Functions cannot be selected
during Demo/Preset Song
mode or when the user song
recorder is in operation.
NOTE
To cancel the function in Step 2,
3, or 4, press the [TEMPO/
FUNCTION# ▼, ▲] button any
time to exit Function mode.
TIP
After you select the function, the
current setting will be displayed
when the [–/NO] or [+/YES] but-
ton is pressed for the first time.
Detailed Settings – [FUNCTION] 35