Basic Procedure In Function Mode - Yamaha P-90 Owner's Manual

Basic Procedure in Function Mode

Follow the steps below to use the functions.
(If you become lost while using a function, return to this page and read the basic procedure.)
2 4
MASTER VOLUME
MIN MAX
START/ TEMPO/
BRILLIANCE
MELLOW BRIGHT DEMO STOP FUNCTION#
METRONOME
Procedure
1.
Engage Function mode.
Press the
[FUNCTION]
will appear on the display. (The indication of "
the status of the unit and usage.)
2.
Select a function.
Use the
[TEMPO/FUNCTION#
from F1–F9.
START/ TEMPO/
STOP FUNCTION#
3.
Use the [–/NO] [+/YES] buttons.
If the function does not include sub-modes, start setting the parameters.
If the function includes sub-modes, press the
respective sub-mode.
4.
Operate the desired function using the following
two buttons.
1
[TEMPO/FUNCTION#
Selects the desired function/sub-mode.
2 [–/NO] or
[+/YES]
After you select the desired function or sub-mode, set the ON/OFF, select
the type, or change the value, accordingly.
Depending on the setting, the default setting (which is used when you
first turn on the power to the P-90) is recalled by pressing the
buttons simultaneously.
[+/YES]
1 5 3 4
FUNCTION – / NO + / YES PRESET TRACK
TEMPO/ OTHER VALUE
button so that its
[FUNCTION]
buttons to select the desired function
, ]
FUNCTION
[+/YES]
, ]
ROOM CHORUS
HALL 1 PHASER HARD
HALL 2 TREMOLO MEDIUM
START/
STAGE DELAY SOFT ON
STOP REC
SONG REVERB EFFECT TOUCH TRANSPOSE
indicator lights.
" varies depending on
button once to enter the
and
[–/NO]
P-90
GRAND GRAND E. PIANO E. PIANO CLAVI./ VIBES/
PIANO 1 PIANO 2 1 2 HARPSI. GUITAR
CHURCH JAZZ WOOD
ORGAN ORGAN STRINGS CHOIR BASS E.BASS VARIATION SPLIT
VOICE
ELECTRONIC PIANO
Functions cannot be selected
during Demo/Preset Song
mode or when the user song
recorder is in operation.
To cancel the function in Step 2,
3, or 4, press the [TEMPO/
FUNCTION# , ] button any
time to exit Function mode.
After you select the function, the
current setting will be displayed
when the [–/NO] or [+/YES] but-
ton is pressed for the first time.
Detailed Settings – [FUNCTION] 33