Basic Procedure In Function Mode - Yamaha Clavinova CLP-265GP Owner's Manual

Basic Procedure in Function Mode

Follow the steps below to use the functions.
(If you become lost while using a function, return to this page and read the basic procedure.)
REC
ON
MIN MAX
MASTER VOLUME DEMO TRANSPOSE
Procedure
1.
Engage the Function mode.
Press the
[TEMPO/FUNCTION#]
lights.
will appear on the display. (The indication of "
the status of the unit and usage.)
2.
Select a function.
[TEMPO/FUNCTION# ▼, ▲]
Use the
from F1–F8.
TEMPO
FUNCTION #
TEMPO / FUNCTION
3.
Use the [–/NO] [+/YES] buttons.
If the function does not include sub-modes, start setting the parameters.
If the function includes sub-modes, press the
respective sub-mode.
4.
Operate the desired function using the following
two buttons.
[TEMPO/FUNCTION# ▼, ▲]
1
Selects the desired function/sub-mode.
2 [–/NO] or
[+/YES]
After you select the desired function or sub-mode, set the ON/OFF, select
the type, or change the value, accordingly.
Depending on the setting, the default setting (which is used when you first
turn on the power to the Clavinova) is recalled by pressing the
[+/YES] buttons simultaneously.
1 5 2 4
TEMPO / OTHER VALUE
LEFT RIGHT ON/OFF
USER TEMPO METRONOME
STOP PLAY/PAUSE
#
PRESET FUNCTION
SYNC START
SONG SONG SELECT TEMPO / FUNCTION #
button so that its
buttons to select the desired function
#
[+/YES]
3 4
GRAND GRAND E.PIANO E.PIANO
PIANO 1 PIANO 2 1 2
CHURCH CHURCH JAZZ STRINGS
— / NO +
/ YES ORGAN 1 ORGAN 2 ORGAN 1
VOICE
indicator
[FUNCTION#]
" varies depending on
button once to enter the
and
[–/NO]
Detailed Settings – [FUNCTION]
HARPSI- HARPSI- VIBRA-
CHORD 1 CHORD 2 PHONE
ROOM CHORUS
BRIGHT HALL 1 PHASER HARD
NORMAL HALL 2 TREMOLO MEDIUM
STRINGS
2 CHOIR GUITAR MELLOW STAGE ROT ARY SP SOFT
BRILLIANCE REVERB EFFECT TOUCH
NOTE
Functions cannot be selected
during Demo/Song Select
mode or when the user song
recorder is in operation.
NOTE
To cancel the function in Step
2, 3, or 4, press the [TEMPO/
FUNCTION# ▼, ▲] button any
time to exit Function mode.
NOTE
After you select the function,
the current setting will be dis-
played when the [–/NO] or [+/
YES] button is pressed for the
first time.
CLP-265GP Owner's Manual
CLP -265GP
37